BA2903SFV-TR 查看數據表（PDF） - ROHM Semiconductor
零件编号
产品描述 (功能)
生产厂家
BA2903SFV-TR Datasheet PDF : 56 Pages
| |||
BA8391G BA10393F BA10339xx
BA2903xxx BA2903Sxxx BA2903Wxx BA2901xx BA2901Sxx
Datasheet
Absolute Maximum Ratings - continued
Parameter
Symbol
Rating
Unit
BA10393F
BA10339xx
Supply Voltage
VCC-VEE
+36
V
SOP8
0.62 (Note 5,8)
-
Power Dissipation
Pd SOP14
-
0.49 (Note 6,8)
W
SSOP-B14
-
0.70 (Note 7,8)
Differential Input Voltage(Note 9)
Input Common-mode
Voltage Range
Input Current(Note 10)
Operating Supply Voltage
Operating Temperature Range
VID
VICM
II
VOPR
TOPR
+36
V
(VEE-0.3) to VCC
V
-10
mA
+2.0 to +36.0
(±1.0 to ±18.0)
+3.0 to +36.0
(±1.5 to ±18.0)
V
-40 to +85
°C
Storage Temperature Range
TSTG
-55 to +125
°C
Maximum Junction Temperature
TJMAX
+125
°C
(Note 5) To use at temperature above Ta＝25°C reduce 6.2mW.
(Note 6) To use at temperature above Ta＝25°C reduce 4.9mW.
(Note 7) To use at temperature above Ta＝25°C reduce 7.0mW.
(Note 8) Mounted on a FR4 glass epoxy PCB(70mm×70mm×1.6mm).
(Note 9) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VEE.
(Note 10) Excessive input current will flow if a differential input voltage in excess of approximately 0.6V is applied between the input unless some limiting
resistance is used.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over
the absolute maximum ratings.
Parameter
Symbol
Rating
BA2903Sxxx BA2901Sxx BA2903xxx
Unit
BA2901xx
Supply Voltage
Power Dissipation
Differential Input Voltage (Note 17)
Input Common-mode
Voltage Range
Input Current (Note 18)
Operating Supply Voltage
Operating Temperature Range
VCC-VEE
+36
V
SOP8
0.78 (Note 11,16)
-
0.78 (Note 11,16)
-
SSOP-B8 0.69 (Note 12,16)
-
0.69 (Note 12,16)
-
Pd MSOP8 0.59 (Note 13,16)
-
0.59 (Note 13,16)
-
W
SOP14
-
0.61 (Note 14,16)
-
0.61 (Note 14,16)
SSOP-B14
-
0.87 (Note 15,16)
-
0.87 (Note 15,16)
VID
36
V
VICM
(VEE-0.3) to (VEE+36)
V
II
VOPR
TOPR
-10
mA
+2.0 to +36.0
(±1.0 to ±18.0)
V
-40 to +105
-40 to +125
°C
Storage Temperature Range
TSTG
-55 to +150
°C
Maximum Junction Temperature
TJMAX
+150
°C
(Note 11) To use at temperature above Ta＝25°C reduce 6.2mW.
(Note 12) To use at temperature above Ta＝25°C reduce 5.5mW.
(Note 13) To use at temperature above Ta＝25°C reduce 4.7mW.
(Note 14) To use at temperature above Ta＝25°C reduce 4.9mW.
(Note 15) To use at temperature above Ta＝25°C reduce 7.0mW.
(Note 16) Mounted on a FR4 glass epoxy PCB(70mm×70mm×1.6mm).
(Note 17) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VEE.
(Note 18) Excessive input current will flow if a differential input voltage in excess of approximately 0.6V is applied between the input unless some limiting
resistance is used.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over
the absolute maximum ratings.
www.rohm.com
©2013 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
5/53
TSZ02201-0RFR0G200200-1-2
11.Dec.2013 Rev.003
Share Link: 