DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

BD5446EFV 查看數據表(PDF) - ROHM Semiconductor

零件编号
产品描述 (功能)
生产厂家
BD5446EFV
ROHM
ROHM Semiconductor ROHM
BD5446EFV Datasheet PDF : 32 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
BD5446EFV
Technical Note
Input digital audio signal sampling frequency (fs) explanation
PWM sampling frequency, Soft-start, Soft-mute time, and the detection time of the DC voltage protection in the speaker
depends on sampling frequency (fs) of the digital audio input.
Sampling frequency of the
digital audio input
(fs)
32kHz
44.1kHz
48kHz
PWM sampling frequency
(fpwm)
512kHz
705.6kHz
768kHz
Soft-start / Soft-mute time
64msec.
46msec.
43msec.
DC voltage protection in
the speaker detection time
64msec.
46msec.
43msec.
For voltage gain (Gain setting)
BD5446EFV prescribe voltage gain at speaker output (BTL output) under the definition 0dBV (1Vrms) as full scale input of
the digital audio input signal. For example, digital audio input signal = Full scale input, Gain setting = 20dB, Load resistance
RL_SP = 8will give speaker output (BTL output) amplitude as Vo=10Vrms. (Output power Po = Vo2/RL_SP = 12.5W )
Speaker output and DAC output
Digital audio input signal SDATA1 will be output to the speaker. (SDATA2 will not be output to the speaker. DAC output can
be selected either from digital audio input signal SDATA1 or SDATA2.)
Format of digital audio input
SYS_CLK: It is System Clock input signal.
It will input LRCLK, BCLK, SDATA1 (SDATA2) that synchronizes with this clock that are 256 times of sampling frequency
(256fs).
LRCLK: It is L/R clock input signal.
It corresponds to 32kHz/44.1kHz/48kHz with those clock (fs) that are same to the sampling frequency (fs) .
The data of a left channel and a right channel for one sample is input to this section.
BCLK: It is Bit Clock input signal.
It is used for the latch of data in every one bit by sampling frequency’s 64 times sampling frequency (64fs).
SDATA1 & SDATA2: It is Data input signal.
It is amplitude data. The data length is different according to the resolution of the input digital audio data.
It corresponds to 16/ 20/ 24 bit.
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
12/31
2011.06 - Rev.C

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]