C8051F043 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

C8051F043

8K ISP FLASH MCU Family

Unspecified 

C8051F040/1/2/3/4/5/6/7

8K ISP FLASH MCU Family

Analog Peripherals

- 10 or 12-Bit SAR ADC

• 12-bit (C8051F040/1) or

10-bit (C8051F042/3/4/5/6/7) resolution

• ± 1 LSB INL, guaranteed no missing codes

• Programmable throughput up to 100 ksps

• 13 External Inputs; single-ended or differential

• SW programmable high voltage difference amplifier

• Programmable amplifier gain: 16, 8, 4, 2, 1, 0.5

• Data-dependent windowed interrupt generator

• Built-in temperature sensor

- 8-bit SAR ADC (C8051F040/1/2/3 only)

• Programmable throughput up to 500 ksps

• 8 External Inputs, single-ended or differential

• Programmable amplifier gain: 4, 2, 1, 0.5

- Two 12-bit DACs (C8051F040/1/2/3 only)

• Can synchronize outputs to timers for jitter-free wave-

form generation

- Three Analog Comparators

• Programmable hysteresis/response time

- Voltage Reference

- Precision VDD Monitor/Brown-Out Detector

On-Chip JTAG Debug & Boundary Scan

- On-chip debug circuitry facilitates full- speed, non-

intrusive in-circuit/in-system debugging

- Provides breakpoints, single-stepping, watchpoints,

stack monitor; inspect/modify memory and registers

- Superior performance to emulation systems using

ICE-chips, target pods, and sockets

- IEEE1149.1 compliant boundary scan

- Complete development kit

High-Speed 8051 μC Core

- Pipelined instruction architecture; executes 70% of

instruction set in 1 or 2 system clocks

- Up to 25 MIPS throughput with 25 MHz clock

- 20 vectored interrupt sources

Memory

- 4352 bytes internal data RAM (4 k + 256)

- 64 kB (C8051F040/1/2/3/4/5)

or 32 kB (C8051F046/7) Flash; in-system program-

mable in 512-byte sectors

- External 64 kB data memory interface (programma-

ble multiplexed or non-multiplexed modes)

Digital Peripherals

- 8 byte-wide port I/O (C8051F040/2/4/6); 5 V tolerant

- 4 byte-wide port I/O (C8051F041/3/5/7); 5 V tolerant

- Bosch Controller Area Network (CAN 2.0B), hard-

ware SMBus™ (I2C™ Compatible), SPI™, and

two UART serial ports available concurrently

- Programmable 16-bit counter/timer array with

6 capture/compare modules

- 5 general purpose 16-bit counter/timers

- Dedicated watch-dog timer; bi-directional reset pin

Clock Sources

- Internal calibrated programmable oscillator: 3 to

24.5 MHz

- External oscillator: crystal, RC, C, or clock

- Real-time clock mode using Timer 2, 3, 4, or PCA

Supply Voltage: 2.7 to 3.6 V

- Multiple power saving sleep and shutdown modes

100-Pin and 64-Pin TQFP Packages Available

- Temperature Range: –40 to +85 °C

Rev. 1.6 5/16

Copyright © 2016 by Silicon Laboratories

C8051F040/1/2/3/4/5/6/7

Share Link: