COM20020 查看數據表（PDF） - SMSC -> Microchip

零件编号

产品描述 (功能)

生产厂家

COM20020

COM20020 3.3V ULANC Universal Local Area Network Controller with 2K x 8 On-Board RAM

SMSC -> Microchip 

Backplane Configuration

The Backplane Open Drain Configuration is

recommended for cost-sensitive, short-distance

applications like backplanes and instrumentation.

This mode is advantageous because it saves

components, cost, and power.

Since the Backplane Configuration encodes data

differently than the traditional Hybrid

Configuration, nodes utilizing the Backplane

Configuration cannot communicate directly with

nodes utilizing the Traditional Hybrid

Configuration. The Backplane Configuration does

not isolate the node from the media nor protects it

from Common Mode noise, but Common Mode

Noise is less of a problem in short distances.

The COM20020 supplies a programmable output

driver for Backplane Mode operation. A

push/pull or open drain driver can be selected by

programming the P1MODE bit of the Setup 1

Register (see register descriptions for details).

The COM20020 defaults to an open drain output.

The Backplane Configuration provides for direct

connection between the COM20020 and the

media. Only one pull-up resistor (in open drain

configuration of the output driver) is required

somewhere on the media (not on each individual

node). The nPULSE1 signal, in this mode, is an

open drain or push/pull driver and is used to

directly drive the media. It issues a 200nS

negative pulse to transmit a logic "1". Note that

when used in the open-drain mode, the

COM20020 does not have a fail/safe input on the

RXIN pin. The nPULSE1 signal actually contains

a weak pull-up resistor. This pull-up should not

take the place of the resistor required on the

media for open drain mode.

18

Share Link: