CY14B104M 查看數據表（PDF） - Cypress Semiconductor
零件编号
产品描述 (功能)
生产厂家
CY14B104M Datasheet PDF : 29 Pages
| |||
PRELIMINARY
CY14B104K/CY14B104M
Table 4. Register Map Detail
0x1FFFF
0x1FFFE
0x1FFFD
Time Keeping - Years
D7
D6
D5
D4
D3
D2
D1
D0
10s Years
Years
Contains the lower two BCD digits of the year. Lower nibble contains the value for years; upper nibble contains the
value for 10s of years. Each nibble operates from 0 to 9. The range for the register is 0–99.
Time Keeping - Months
D7
D6
D5
D4
D3
D2
D1
D0
0
0
0
10s Month
Months
Contains the BCD digits of the month. Lower nibble contains the lower digit and operates from 0 to 9; upper nibble
(one bit) contains the upper digit and operates from 0 to 1. The range for the register is 1–12.
Time Keeping - Date
D7
D6
D5
D4
D3
D2
D1
D0
0
0
10s Day of Month
Day of Month
Contains the BCD digits for the date of the month. Lower nibble contains the lower digit and operates from 0 to 9; upper
nibble contains the upper digit and operates from 0 to 3. The range for the register is 1–31. Leap years are automatically
adjusted for.
0x1FFFC
0x1FFFB
Time Keeping - Day
D7
D6
D5
D4
D3
D2
D1
D0
0
0
0
0
0
Day of Week
Lower nibble contains a value that correlates to day of the week. Day of the week is a ring counter that counts from 1
to 7 then returns to 1. The user must assign meaning to the day value, because the day is not integrated with the date.
Time Keeping - Hours
D7
D6
D5
D4
D3
D2
D1
D0
12/24
0
10s Hours
Hours
0x1FFFA
Contains the BCD value of hours in 24 hour format. Lower nibble contains the lower digit and operates from 0 to 9;
upper nibble (two bits) contains the upper digit and operates from 0 to 2. The range for the register is 0–23.
Time Keeping - Minutes
D7
D6
D5
D4
D3
D2
D1
D0
0
10s Minutes
Minutes
Contains the BCD value of minutes. Lower nibble contains the lower digit and operates from 0 to 9; upper nibble
contains the upper minutes digit and operates from 0 to 5. The range for the register is 0–59.
0x1FFF9
0X1FFF8
OSCEN
Calibration
Sign
Calibration
Time Keeping - Seconds
D7
D6
D5
D4
D3
D2
D1
D0
0
10s Seconds
Seconds
Contains the BCD value of seconds. Lower nibble contains the lower digit and operates from 0 to 9; upper nibble
contains the upper digit and operates from 0 to 5. The range for the register is 0–59.
Calibration/Control
D7
D6
D5
D4
D3
D2
D1
D0
OSCEN
0
Calibration
Sign
Calibration
Oscillator Enable. When set to 1, the oscillator is stopped. When set to 0, the oscillator runs. Disabling the oscillator
saves battery or capacitor power during storage. On a no-battery power up, this bit is set to 0.
Determines if the calibration adjustment is applied as an addition to or as a subtraction from the time-base.
These five bits control the calibration of the clock.
Document #: 001-07103 Rev. *I
Page 11 of 29
[+] Feedback
Share Link: 