APE1004 查看數據表（PDF） - APLUS INTEGRATED CIRCUITS

零件编号

产品描述 (功能)

生产厂家

APE1004

very low cost voice and melody synthesizer with 4-bits CPU

APLUS INTEGRATED CIRCUITS 

APExx04 Series

1.0 General Description

The APExx04 series are very low cost voice and melody synthesizer with 4-bits CPU. They have various

features including 4-bits ALU, ROM, RAM, I/O ports, timers, clock generator, voice and melody

synthesizer, and PWM (Direct drive) output, etc. The audio synthesizer contains one voice-channel and

two melody-channels. Furthermore, they consist of 27 instructions in these devices. With CMOS

technology and halt function can minimize power dissipation. Their architectures are similar to RISC, with

two stages of instruction pipeline. They allow all instructions to be executed in a single cycle, except for

program branches and data table read instructions (which need two instruction cycles).

2.0 Features

(1) Single power supply can operate from 2.4V to 5.5V at 4MHz or 8MHz.

(2) Program ROM: 8k x 10 bits

(3) 1 set of 15-bits DPR can access up to 32k x 10 bits melody data memory space, and 1 set of 15-bits

VPR can access up to 32k x 10 bits voice data memory space.

Product

APE0504

APE1004

Voice Duration (sec) Voice Pointer (VPR) ROM Size (10-bit)

5

14-bits

16k

10

15-bits

32k

(4) Data Registers:

a). 96 x 4-bits data RAM (00-5Fh)

b). Unbanked special function registers (SFR) range: 00h-2Fh

(5) I/O Ports:

a). PRA: 4-bits I/O Port A (10h) can be programmed to input/output individually. (Register control)

(6) On-chip clock generator: Resistive Clock Drive (RM)

(7) Timer: 1-set Voice Interrupt (Timer0: a 9-bits auto-reload timer/counter).

(8) Stack: 2-level subroutine nesting.

(9) Built-in 4 Level Volume Control can be programmed.

(10) Built-in IR Carry Output: Port A[1] can be configured as IR pin by 38k / 56kHz. (Mask option)

(11) External Reset: Port A[3] can be configured as reset pin. (Mask opton)

(12) HALT and Release from HALT function to reduce power consumption

(13) Watch Dog Timer (WDT)

(14) Instruction: 1-cycle instruction except for table read and program branches which are 2-cycles

(15) Number of instruction: 27

(16) DAC: 1 channel voice and dual tone melody synthesizer (One 8-bits PWM output).

1

Rev 1.3

2003/8/18

Share Link: