DF30FB-20DS-0.4V 查看數據表（PDF） - HIROSE ELECTRIC

零件编号

产品描述 (功能)

生产厂家

DF30FB-20DS-0.4V

0.4 mm Pitch, 0.9 mm Height, Board-to-Board / Board-to-FPC Connectors

HIROSE ELECTRIC 

BHandling Precautions when un-mating the connectors

DF30*-*DS-0.4V(81)

DF30*-*DP-0.4V(81)

Fully mated

Receptacle

Header

Lift even one side, keeping both boards parallel to each other.

Fig. A

Fig. B

When handling circumstances prevent the connector from being

kept level during un-mating, one end may be lifted separate as

shown on Fig. A.

However, to utilize this procedure the connector must be mounted

on a sufficiently rigid circuit board.

Any deflection of the board during this operation may result in

damage to the connector or solder joints.

Do not attempt the start of the un-mating of the connectors from one

side (Fig. B).

When removal is from the width orientation as illustrated in the

diagram to the left, damage could be caused to the connector. Do

not perform removal from the width orientation.

11

Share Link: