DS1233A-15 查看數據表（PDF） - Dallas Semiconductor -> Maxim Integrated

零件编号

产品描述 (功能)

生产厂家

DS1233A-15

3.3V EconoReset

Dallas Semiconductor -> Maxim Integrated 

OPERATION — PUSHBUTTON RESET

DS1233A

The DS1233A provides for a pushbutton switch to be connected to the RST output pin. When the

DS1233A is not in a reset cycle, it continuously monitors the RST signal for a low-going edge. If an edge

is detected, the DS1233A will debounce the switch by pulling the RST line low. After the internal timer

has expired, the DS1233A will continue to monitor the RST line. If the line is still low, the DS1233A will

continue to monitor the line looking for a rising edge. Upon detecting a release, the DS1233A will force

the RST line low and hold it low for 350ms.

NOTE:

For proper operation with an external pushbutton, a capacitor between 100pF and 0.01mF must be

connected between RST and ground. In applications where additional reset current is required, a

minimum capacitance of 500 pF should be used, along with a parallel external pull-up resistor of 1kW

minimum.

BLOCK DIAGRAM Figure 1

APPLICATION EXAMPLE Figure 2

2 of 5

Share Link: