DS1557 查看數據表（PDF） - Dallas Semiconductor -> Maxim Integrated

零件编号

产品描述 (功能)

生产厂家

DS1557

4MEG NV Y2KC Timekeeping RAM

Dallas Semiconductor -> Maxim Integrated 

DS1557

The RTC Registers are double-buffered into an internal and external set. The user has direct access to the

external set. Clock/calendar updates to the external set of registers can be disabled and enabled to allow

the user to access static data. Assuming the internal oscillator is turned on, the internal set of registers are

continuously updated; this occurs regardless of external registers settings to guarantee that accurate RTC

information is always maintained.

The DS1557 has interrupt ( IRQ /FT) and reset ( RST ) outputs which can be used to control CPU activity.

The IRQ /FT interrupt output can be used to generate an external interrupt when the RTC Register values

match user programmed alarm values. The interrupt is always available while the device is powered from

the system supply and can be programmed to occur when in the battery backed state to serve as a system

wake-up. Either the IRQ /FT or RST outputs can also be used as a CPU watchdog timer, CPU activity is

monitored and an interrupt or reset output will be activated if the correct activity is not detected within

programmed limits. The DS1557 power-on reset can be used to detect a system power down or failure

and hold the CPU in a safe reset state until normal power returns and stabilizes; the RST output is used

for this function.

The DS1557 also contains its own power-fail circuitry which automatically deselects the device when the

VCC supply enters an out of tolerance condition. This feature provides a high degree of data security

during unpredictable system operation brought on by low VCC levels.

DS1557 BLOCK DIAGRAM Figure 1

2 of 19

Share Link: