DS2760 查看數據表（PDF） - Dallas Semiconductor -> Maxim Integrated

零件编号

产品描述 (功能)

生产厂家

DS2760

High Precision Li-Ion Battery Monitor

Dallas Semiconductor -> Maxim Integrated 

ORDERING INFORMATION

DS2760E

TSSOP, External Sense

DS2760EA

Res., 4.35V VOV

TSSOP, External Sense

DS2760T

Res., 4.275V VOV

DS2760E on Tape & Reel

DS2760TA

DS2760EA on Tape &

Reel

DS2760E-025

TSSOP, 25 mΩ Sense

DS2760EA-025

Res., 4.35V VOV

TSSOP, 25 mΩ Sense

Res., 4.275V VOV

DS2760T-025

DS2760TA-025

DS2760X

DS2760XA

DS2760X-025

DS2760XA-025

DS2760

DS2760E-025 in Tape &

Reel

DS2760EA-025 in Tape

& Reel

Flipchip, Ext. Sense Res.,

T&R, 4.35V VOV

Flipchip, Ext. Sense Res.,

T&R, 4.275V VOV

Flipchip, 25 mΩ Sense

Res., T&R, 4.35V VOV

Flipchip, 25 mΩ Sense

Res., T&R, 4.275V VOV

DESCRIPTION

The DS2760 High Precision Li-Ion Battery Monitor is a data acquisition, information storage, and safety

protection device tailored for cost-sensitive battery pack applications. This low-power device integrates

precise temperature, voltage, and current measurement, nonvolatile data storage, and Li-Ion protection

into the small footprint of either a TSSOP package or flip-chip. The DS2760 is a key component in

applications including remaining capacity estimation, safety monitoring, and battery-specific data storage.

Via its 1-Wire interface, the DS2760 gives the host system read/write access to status and control

registers, instrumentation registers, and general purpose data storage. Each device has a factory-

programmed 64-bit net address which allows it to be individually addressed by the host system,

supporting multi-battery operation.

The DS2760 is capable of performing temperature, voltage and current measurement to a resolution

sufficient to support process monitoring applications such as battery charge control, remaining capacity

estimation, and safety monitoring. Temperature is measured using an on-chip sensor, eliminating the need

for a separate thermistor. Bi-directional current measurement and accumulation are accomplished using

either an internal 25 mΩ sense resistor or an external device. The DS2760 also features a programmable

I/O pin that allows the host system to sense and control other electronics in the pack, including switches,

vibration motors, speakers and LEDs.

Three types of memory are provided on the DS2760 for battery information storage: EEPROM, lockable

EEPROM and SRAM. EEPROM memory saves important battery data in true nonvolatile memory that

is unaffected by severe battery depletion, accidental shorts or ESD events. Lockable EEPROM becomes

ROM when locked to provide additional security for unchanging battery data. SRAM provides

inexpensive storage for temporary data.

2 of 25

Share Link: