DSPIC30F6013 查看數據表（PDF） - Microchip Technology

零件编号

产品描述 (功能)

生产厂家

DSPIC30F6013

High-Performance, 16-Bit Digital Signal Controllers

Microchip Technology 

dsPIC30F3014/4013

dsPIC30F3014/4013 High-Performance, 16-Bit

Digital Signal Controllers

Note: This data sheet summarizes features of this group

of dsPIC30F devices and is not intended to be a complete

reference source. For more information on the CPU,

peripherals, register descriptions and general device

functionality, refer to the “dsPIC30F Family Reference

Manual” (DS70046). For more information on the device

instruction set and programming, refer to the “dsPIC30F/

33F Programmer’s Reference Manual” (DS70157).

High-Performance Modified RISC CPU:

• Modified Harvard architecture

• C compiler optimized instruction set architecture

• Flexible addressing modes

• 83 base instructions

• 24-bit wide instructions, 16-bit wide data path

• Up to 48 Kbytes on-chip Flash program space

• 2 Kbytes of on-chip data RAM

• 1 Kbyte of nonvolatile data EEPROM

• 16 x 16-bit working register array

• Up to 30 MIPS operation:

- DC to 40 MHz external clock input

- 4 MHz-10 MHz oscillator input with

PLL active (4x, 8x, 16x)

• Up to 33 interrupt sources:

- 8 user selectable priority levels

- 3 external interrupt sources

- 4 processor traps

DSP Features:

• Dual data fetch

• Modulo and Bit-Reversed modes

• Two 40-bit wide accumulators with optional

saturation logic

• 17-bit x 17-bit single-cycle hardware

fractional/integer multiplier

• All DSP instructions are single cycle

- Multiply-Accumulate (MAC) operation

• Single-cycle ±16 shift

Peripheral Features:

• High-current sink/source I/O pins: 25 mA/25 mA

• Up to five 16-bit timers/counters; optionally pair

up

16-bit timers into 32-bit timer modules

• Up to four 16-bit Capture input functions

• Up to four 16-bit Compare/PWM output functions

• Data Converter Interface (DCI) supports common

audio Codec protocols, including I2S and AC’97

• 3-wire SPI module (supports 4 Frame modes)

• I2C™ module supports Multi-Master/Slave mode

and 7-bit/10-bit addressing

• Up to two addressable UART modules with FIFO

buffers

• CAN bus module compliant with CAN 2.0B

standard

Analog Features:

• 12-bit Analog-to-Digital Converter (ADC) with:

- 200 ksps conversion rate

- Up to 13 input channels

- Conversion available during Sleep and Idle

• Programmable Low-Voltage Detection (PLVD)

• Programmable Brown-out Reset

Special Microcontroller Features:

• Enhanced Flash program memory:

- 10,000 erase/write cycle (min.) for

industrial temperature range, 100K (typical)

• Data EEPROM memory:

- 100,000 erase/write cycle (min.) for

industrial temperature range, 1M (typical)

• Self-reprogrammable under software control

• Power-on Reset (POR), Power-up Timer (PWRT)

and Oscillator Start-up Timer (OST)

• Flexible Watchdog Timer (WDT) with on-chip

low-power RC oscillator for reliable operation

• Fail-Safe Clock Monitor operation:

- Detects clock failure and switches to on-chip

low-power RC oscillator

© 2007 Microchip Technology Inc.

DS70138E-page 1

Share Link: