E6F-AG5C-C7202M 查看數據表（PDF） - OMRON Corporation

零件编号

产品描述 (功能)

生产厂家

E6F-AG5C-C7202M

Cam Positioner, Encoder Absolute

OMRON Corporation 

H8PS

■ Characteristics

Setting unit

Number of steps

Inputs

Encoder input

Encoder cable extension

distance

Output response time

Insulation resistance

Dielectric strength

Impulse withstand voltage

Noise immunity

Static immunity

Vibration Destruction

resistance Malfunction

Shock

Destruction

resistance Malfunction

Approved safety standards

EMC

Weight

0.5° increments at a resolution of 720, 1° increments at a resolution of 256 or 360 (See note 1.)

Up to 10 steps can be set for each cam to turn the output ON/OFF 10 times. (See note 2.)

Connections to a dedicated absolute encoder

• Response rotation speed (in Run/Test Mode)

1600 r/min max. at a resolution of 256 or 360 (1200 r/min max. if ADV function is set for 4 or more cams)

(See notes 3 and 4.)

800 r/min max. at a resolution of 720 (600 r/min max. if ADV function is set for 4 or more cams)

• Includes error data detection

256/360 resolution

100 m max. at 330 r/min or less

52 m max. at 331 to 1200 r/min (331 to 900 r/min if ADV function is set for 4 or more cams)

12 m max. at 1201 to 1600 r/min (901 to 1200 r/min if ADV function is set for 4 or more cams)

720 resolution

100 m max. at 330 r/min or less

52 m max. at 331 to 600 r/min (331 to 450 r/min if ADV function is set for 4 or more cams)

12 m max. at 601 to 800 r/min (451 to 600 r/min if ADV function is set for 4 or more cams)

0.3 ms max.

100 MΩ min. (at 500 VDC) between current-carrying terminals and exposed non-current-carrying metal

parts, between all current-carrying parts and the USB connector

1000 VAC, 50/60 Hz for 1 min between current-carrying terminals and exposed non-current-carrying metal

parts

500 VAC, 50/60 Hz for 1 min between current-carrying section and USB connector, and between current-

carrying terminals and non-current-carrying metal part of output connector

1 kV between power terminals

1.5 kV between current-carrying terminals and exposed non-current-carrying metal parts

±480 V between power terminals, ±600 V between input terminals

Square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)

8 kV (malfunction), 15 kV (destruction)

10 to 55 Hz with 0.75-mm single amplitude each in 3 directions for 2 hours each

10 to 55 Hz with 0.5-mm single amplitude each in 3 directions for 10 minutes each

300 m/s2 3 times each in 6 directions

200 m/s2 3 times each in 6 directions

cULus (Listing): UL508/CSA C22.2 No. 14

(EMI)

EN61326

Emission Enclosure:

EN55011 Group1 Class A

(EMS)

EN61326

Immunity ESD:

EN61000-4-2: 4 kV contact discharge

8 kV air discharge

Immunity RF-interference:

EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz)

10 V/m (Pulse-modulated, 900 MHz ±5 MHz)

Immunity Conducted Disturbance EN61000-4-6: 10 V (0.15 to 80 MHz)

Immunity Burst:

EN61000-4-4: 2 kV for power-line

1 kV for I/O signal-line

Immunity Surge:

EN61000-4-5: 1 kV line to line (power line)

2 kV line to ground (power line)

Approx. 300 g (Cam Positioner main unit only)

Note: 1. Cam output precision, however, is 2° max. for Encoder with 256 resolution (P/R).

2. Although 32-output Models can have 10 steps set for any one output, there must be no more than 160 steps total set for all cam outputs.

3. The maximum is 1000 r/min when an E6CP-AG5C-C Encoder is connected.

4. ADV stands for Advance Angle Compensation.

4

Share Link: