DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

EL5126 查看數據表(PDF) - Intersil

零件编号
产品描述 (功能)
生产厂家
EL5126 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Block Diagram
EL5126
EIGHT
CHANNEL
MEMORY
VOLTAGE
SOURCES
I2C DATA IN
I2C CLOCK IN
CONTROL IF
REFERENCE HIGH
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
REFERENCE LOW
REFERENCE DECOUPLE
FILTER STD/REG
A0 OSCILLATOR OSCILLATOR
SELECT INPUT/OUTPUT
CHANNEL OUTPUTS
Each of the channel outputs has a rail-to-rail buffer. This
enables all channels to have the capability to drive to within
100mV of the power rails, (see Electrical Characteristics for
details).
When driving large capacitive loads, a series resistor should
be placed in series with the output. (Usually between 5Ω and
50Ω).
Each of the channels is updated on a continuous cycle, the
time for the new data to appear at a specific output will
depend on the exact timing relationship of the incoming data
to this cycle.
The best-case scenario is when the data has just been
captured and then passed on to the output stage
immediately; this can be as short as 48µs. In the worst-case
scenario this will be 380µs, when the data has just missed
the cycle.
When a large change in output voltage is required, the
change will occur in 2V steps, thus the requisite number of
timing cycles will be added to the overall update time. This
means that a large change of 16V can take between 3ms
and 3.4ms depending on the absolute timing relative to the
update cycle.
POWER DISSIPATION
With the 30mA maximum continues output drive capability
for each channel, it is possible to exceed the 125°C absolute
maximum junction temperature. Therefore, it is important to
calculate the maximum junction temperature for the
application to determine if load conditions need to be
modified for the part to remain in the safe operation.
The maximum power dissipation allowed in a package is
determined according to:
PDMAX = T----J---M-----A----X--Θ-----J---A-T----A----M----A----X--
where:
• TJMAX = Maximum junction temperature
• TAMAX = Maximum ambient temperature
θJA = Thermal resistance of the package
• PDMAX = Maximum power dissipation in the package
9

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]