FFM105W 查看數據表（PDF） - Rectron Semiconductor
零件编号
产品描述 (功能)
生产厂家
FFM105W Datasheet PDF : 3 Pages
| |||
RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SURFACE MOUNT
FAST RECOVERY SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FFM101W
THRU
FFM107W
FEATURES
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.057 gram
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
SMX
.110 (2.79)
.086 (2.18)
.209 (5.31)
.185 (4.70)
.071 (1.80)
.051 (1.30)
.011 (0.28)
.007 (0.18)
.180 (4.57)
.160 (4.06)
.091 (2.31)
.067 (1.70)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.059 (1.50)
.035 (0.89)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at TA = 55oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Thermal Resistance
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
FFM101W FFM102W FFM103W FFM104W FFM105W FFM106W FFM107W UNITS
50
100
200
400
600
800 1000 Volts
35
70
140
280
420
560
700 Volts
50
100
200
400
600
800 1000 Volts
1.0
Amps
IFSM
30
Amps
(Note 2) RθJL
(Note 3) RθJA
CJ
TJ, TSTG
30
70
15
-55 to + 150
0C/W
0C/W
pF
0C
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted)
CHARACTERISTICS
SYMBOL
Maximum Forward Voltage at 1.0A DC
VF
Maximum Full Load Reverse Current,Full cycle Average at TA =25oC
Maximum DC Reverse Current at
@TA = 25oC
IR
Rated DC Blocking Voltage
@TA = 125oC
Maximum Reverse Recovery Time (Note 4)
trr
NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC
2. Thermal resistance junction to terminal 6.0mm2 copper pads to each terminal.
3. Thermal resistance junction to ambient, 6.0mm2 copper pads to each terminal.
4. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A
5.”Fully ROHS compliant”,”100% Sn plating(Pb-free)”.
FFM101W FFM102W FFM103W FFM104W FFM105W FFM106W FFM107W UNITS
1.3
Volts
50
uAmps
5.0
uAmps
100
uAmps
150
250
500
nSec
2005-10
Share Link: 