FH36 查看數據表（PDF） - HIROSE ELECTRIC

零件编号

产品描述 (功能)

生产厂家

FH36

0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH36 Seriesq0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors

Precautions

Exercise care when handling connectors. Follow recommendations given below.

[ Precautions when mounting connectors on the PCB ]

xHandling before mounting on PCB

Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.

xPC board warpage

Minimize the warpage as much as possible. The connector is straight within 0.1 mm max. Make sure that the mount-

ing area flatness can accept the connector terminals without causing any failure of the solder joints.

xWhen braking the large PC board into individual boards exercise care NOT to damage the installed connectors.

xWhen attaching the boards or other components with the screws make sure that any stresses will NOT cause

board deflections affecting the mounting areas of the connector.

xBending of the board

For a board width of 100 mm, bending of the board must be 0.5 mm max. (Ref to Fig. 1)

100

Connector

F

Connector

F

Board

Board

Fig. 1

100

[ Precautions during FPC insertion and mating ]

Pay attention to the following points when inserting FPC.

xActuator operation

1 Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure that

the force is applied only to the actuator itself, avoiding touching of the contacts.

Actuator

Damage to the actuator

Damage to the actuator

2 Axis of rotation

Assure free rotation of the actuator.

9

Share Link: