APPLICATION (Continued)
Note: C2 through C5 can be 0.01μF to 0.1μF. Select the voltage rating to meet input-to-output isolation requirements. C1 should be the recommended
value suggested in the power module data sheet.
Figure 9. Recommended schematic when used as the input filter to a high-frequency with metal-cased dc-to-dc converter
Note: Avoid routing signals or planes under the power module or the filter module. Please ensure all connections are low impedance.
Figure10. Recommended layout when used as the input filter to a high-frequency with metal-cased dc-to-dc converter
DS_FL75L07_02162012
5