FM24C04A 查看數據表（PDF） - Ramtron International Corporation
零件编号
产品描述 (功能)
生产厂家
FM24C04A Datasheet PDF : 12 Pages
| |||
FM24C04A
Electrical Specifications
Absolute Maximum Ratings
Symbol
Description
VDD
Power Supply Voltage with respect to VSS
VIN
Voltage on any signal pin with respect to VSS
TSTG
TLEAD
VESD
Storage Temperature
Lead Temperature (Soldering, 10 seconds)
Electrostatic Discharge Voltage
- Human Body Model (JEDEC Std JESD22-A114-B)
- Machine Model (JEDEC Std JESD22-A115-A)
Package Moisture Sensitivity Level
Ratings
-1.0V to +7.0V
-1.0V to +7.0V
and VIN < VDD+1.0V *
-55°C to + 125°C
300° C
3kV
300V
MSL-1
* Exception: The “VIN < VDD+1.0V” restriction does not apply to the SCL and SDA inputs.
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating
only, and the functional operation of the device at these or any other conditions above those listed in the operational section of
this specification is not implied. Exposure to absolute maximum ratings conditions for extended periods may affect device
reliability.
DC Operating Conditions (TA = -40° C to + 85° C, VDD = 4.5V to 5.5V unless otherwise specified)
Symbol
Parameter
Min
Typ
Max Units
VDD Main Power Supply
IDD VDD Supply Current
@ SCL = 100 kHz
@ SCL = 400 kHz
@ SCL = 1000 kHz
4.5
5.0
5.5
V
115
150
µA
400
500
µA
800
1000
µA
ISB
ILI
ILO
VIL
VIH
VOL
RIN
Standby Current
Input Leakage Current
Output Leakage Current
Input Low Voltage
Input High Voltage
Output Low Voltage
@ IOL = 3 mA
Input Resistance (WP, A2,A1)
For VIN = VIL (max)
For VIN = VIH (min)
-0.3
0.7 VDD
50
1
1
10
µA
±1
µA
±1
µA
0.3 VDD
V
VDD + 0.5
V
0.4
V
KΩ
MΩ
VHYS Input Hysteresis
0.05 VDD
V
Notes
1
2
3
3
5
4
Notes
1. SCL toggling between VDD-0.3V and VSS, other inputs VSS or VDD-0.3V
2. SCL = SDA = VDD. All inputs VSS or VDD. Stop command issued.
3. VIN or VOUT = VSS to VDD. Does not apply to WP, A2, A1 pins.
4. This parameter is periodically sampled and not 100% tested.
5. The input pull-down circuit is strong (50KΩ) when the input voltage is below VIL and much weaker (1MΩ)
when the input voltage is above VIH.
Rev. 3.0
Mar. 2005
8 of 12
Share Link: 