FM24C04B-G(2012) 查看數據表（PDF） - Ramtron International Corporation
零件编号
产品描述 (功能)
生产厂家
FM24C04B-G Datasheet PDF : 12 Pages
| |||
FM24C04B
Electrical Specifications
Absolute Maximum Ratings
Symbol
VDD
VIN
TSTG
TLEAD
VESD
Description
Power Supply Voltage with respect to VSS
Voltage on any pin with respect to VSS
Storage Temperature
Lead temperature (Soldering, 10 seconds)
Electrostatic Discharge Voltage
- Human Body Model (AEC-Q100-002 Rev. E)
- Charged Device Model (AEC-Q100-011 Rev. B)
- Machine Model (AEC-Q100-003 Rev. E)
Package Moisture Sensitivity Level
Ratings
-1.0V to +7.0V
-1.0V to +7.0V
and VIN < VDD+1.0V *
-55C to + 125C
260 C
3kV
1.25kV
250V
MSL-1
* Exception: The “VIN < VDD+1.0V” restriction does not apply to the SCL and SDA inputs.
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress
rating only, and the functional operation of the device at these or any other conditions above those listed in the operational
section of this specification is not implied. Exposure to absolute maximum ratings conditions for extended periods may affect
device reliability.
DC Operating Conditions (TA = -40 C to + 85 C, VDD = 4.5V to 5.5V unless otherwise specified)
Symbol
Parameter
Min
Typ
Max Units
VDD
Main Power Supply
IDD
VDD Supply Current
@ SCL = 100 kHz
@ SCL = 400 kHz
@ SCL = 1 MHz
4.5
5.0
5.5
V
100
A
200
A
400
A
ISB
Standby Current
ILI
Input Leakage Current
ILO
Output Leakage Current
VIH
Input High Voltage
VIL
Input Low Voltage
VOL
Output Low Voltage
@ IOL = 3.0 mA
RIN
Input Resistance (WP, A1, A2)
For VIN = VIL (max)
For VIN = VIH (min)
0.7 VDD
-0.3
40
1
4
10
A
±1
A
±1
A
VDD + 0.3
V
0.3 VDD
V
0.4
V
K
M
VHYS
Input Hysteresis
0.05 VDD
V
Notes
1
2
3
3
5
4
Notes
1. SCL toggling between VDD-0.3V and VSS, other inputs VSS or VDD-0.3V
2. SCL = SDA = VDD. All inputs VSS or VDD. Stop command issued.
3. VIN or VOUT = VSS to VDD. Does not apply to WP, A1, A2 pins.
4. This parameter is periodically sampled and not 100% tested.
5. The input pull-down circuit is strong (40K) when the input voltage is below VIL and much weaker (1M)
when the input voltage is above VIH.
Rev. 3.0
Jan. 2012
Page 8 of 12
Share Link: 