GJ1118-XXX 查看數據表（PDF） - GTM CORPORATION

零件编号

产品描述 (功能)

生产厂家

GJ1118-XXX

0.8A Low Dropout Positive Adjustable or Fixed-Mode Regulator

GTM CORPORATION 

Block Diagram

ISSUED DATE :2006/06/07

REVISED DATE :

Pin Descriptions

Name I/O Pin#

Adj (GND)

1

Vout

O

2

Vin

I

3

Function

A resistor divider from this pin to the Vout pin and ground sets the output voltage

(Ground only for fixed mode)

The output of the regulator. A minimum of 10uF capacitor (0.15 ESR 20 )

must be connected from this pin to ground to insure stability.

The input pin of regulator. Typically a large storage capacitor (0.15 ESR 20 )

is connected from this pin to ground to insure that the input voltage does not sag

below the minimum dropout voltage during the load transient response. This pin

must always be 1.3V higher than Vout in order for the device to regulate properly.

Absolute Maximum Ratings

Symbol

Parameter

VIN

DC Supply Voltage

PD

Power Dissipation

TST

Storage Temperature

TOP

Operating Junction Temperature Range

Ratings

-0.3 to 12

Internally Limited

-65 ~ + 150

0 ~ + 150

Unit

V

GJ1118

Page: 2/4

Share Link: