IR2E48U6 查看數據表（PDF） - Unspecified
零件编号
产品描述 (功能)
生产厂家
IR2E48U6 Datasheet PDF : 11 Pages
| |||
LED
LEDs FOR CAMERA DATA BACK / LED DRIVERS
★Under development
■ LEDs FOR CAMERA DATA BACK
Model No.
GW01M59001PE
No. of dots
7
Outline dimensions (mm)
2.6 × 2.9 (T: 0.9) Surface-mount type
Radiation color
Amber
(I F = 1 mA, Ta = 25°C)
Luminous intensity (mcd)
(MIN. 0.4
TYP. 0.8)
( ) indicates reference value.
GW01M59001PE
■ LED DRIVERS
Model No.
★IR2D20N/U
Description
24-dot LED panel driver
with constant-current sink
outputs
Function
Supply voltage
(V)
Package
• Output current (constant-current sink outputs) : 30 mA (MAX.)
(setup by external resistor)
• Graduation function (clock cycle setting or external synchronization)
• Independent current control for three systems (for RGB LED)
• LED drive voltage : 15 V
• Rated output voltage : 20 V (MAX.)
• fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection)
4.5 to 5.5
P-SSOP056-0600/
P-HQFN052-0707
★IR2D07N1
★IR2E46U6/Y6
★IR2E47U6
★IR2E48U6
16-dot LED panel driver
with constant-current sink
outputs
• Output current (constant-current sink outputs) : 60 mA (MAX.)
(setup by external resistor)
• Rated output voltage : 7 V (MAX.)
• fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection)
RGB LED driver for
flash lights and illuminations
White LED driver for
back light
• Output current : 155 mA/ch (MAX.) (3ch) (in flash mode)
• Control by I2C bus
• Illumination mode (64 levels/ch)
• Flash mode (32 levels/ch)
• Brightness adjustment
• Output current : 20 mA (MAX.) (setup by external resistor)
• Independent current control for two systems
(4 outputs and 2 outputs)
• LED non-connected judging function
• Brightness adjustment
• Output current : 20 mA (MAX.)
• LED non-connected judging function
• Brightness adjustment
3.0 to 5.5
P-SSOP040-0300
2.7 to 4.5
P-VQFN032-0505/
WL-CSP*1
2.7 to 5.5
P-VQFN024-0404
(*2)
P-VQFN024-0404
*1 WL-CSP : Waferr-level CSP
*2 Contact a SHARP sales office regarding a wafer-level CSP.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may
occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the
latest device specification sheets before using any SHARP device.
105
Share Link: 