DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

GQ2181 查看數據表(PDF) - GTM CORPORATION

零件编号
产品描述 (功能)
生产厂家
GQ2181
GTM
GTM CORPORATION GTM
GQ2181 Datasheet PDF : 5 Pages
1 2 3 4 5
ISSUED DATE :2005/12/12
REVISED DATE :
Ordering Information ( contd. )
Part Number
GQ2181-15
GQ2181-20
GQ2181-27
GQ2181-2H
GQ2181-32
Marking
1L152
XXXX
1L202
XXXX
1L272
XXXX
1L2H2
XXXX
1L322
XXXX
Output Voltage
1.5V
2.0V
2.7V
2.85V
3.2V
Part Number
GQ2181-18
GQ2181-25
GQ2181-28
GQ2181-30
GQ2181-33
Marking
1L182
XXXX
1L252
XXXX
1L282
XXXX
1L302
XXXX
1L332
XXXX
Output Voltage
1.8V
2.5V
2.8V
3.0V
3.3V
Detailed Description
The GQ2181 series of COMS regulators contain a PMOS pass transistor, voltage reference, error amplifier,
over-current protection, and thermal shutdown.
The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal
protection circuits. During normal operation, the error amplifier compares the output voltage to a precision
reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds
150к, or the current exceeds 150mA. During thermal shutdown, the output voltage remains low. Normal
operation is restored when the junction temperature drops below 120к.
The GQ2181 switches from voltage mode to current mode when the load exceeds the rated output current.
This prevents over-stress. The GQ2181 also incorporates current fold-back to reduce power dissipation when
the output is short circuited. This feature becomes active when the output drops below 0.8 volts, and reduces
the current flow by 65%. Full current is restored when the voltage exceeds 0.8 volts.
External Capacitors
The GQ2181 is stable with an output capacitance to ground of 0.22 F or greater. Ceramic capacitors have the
lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the
highest ESR, resulting in the poorest AC response.
A second capacitor is recommended between the input and ground to stabilize Vin. The input capacitor should
be at least 1 F to have a beneficial effect.
A large capacitor improves the AC ripple rejection, but also makes the output come up slowly. This “Soft”
turn-on is desirable in some applications to limit turn-on surges.
All capacitors should be placed in close proximity to the pins. A “Quiet” ground termination is desirable. This
can be achieved with a “Star” connection.
Shutdown
When actively, pulled low, the PMOS pass transistor shuts off, and all internal circuits are powered down. In
this state, the quiescent current is less than 1 A. This pin behaves much like an electronic switch.
Characteristics Curve
3/5

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]