GS8170DW72C 查看數據表（PDF） - Giga Semiconductor
零件编号
产品描述 (功能)
生产厂家
GS8170DW72C Datasheet PDF : 27 Pages
| |||
GS8170DW36/72C-333/300/250/200
Pin Description Table
Symbol
A
ADV
Bx
W
E1
E2 & E3
EP2 & EP3
CK
CQ, CQ
DQ
Description
Address
Advance
Byte Write Enable
Write Enable
Chip Enable
Chip Enable
Chip Enable Program Pin
Clock
Echo Clock
Data I/O
MCH
Must Connect High
MCL
Must Connect Low
ZQ
TCK
TDI
TDO
TMS
NC
VDD
VDDQ
VSS
Output Impedance Control
Test Clock
Test Data In
Test Data Out
Test Mode Select
No Connect
Core Power Supply
Output Driver Power Supply
Ground
Type
Input
Input
Input
Input
Input
Input
Mode Input
Input
Output
Input/Output
Input
Input
Mode Input
Input
Input
Output
Input
—
Input
Input
Input
Comments
—
Active High
Active Low
Active Low
Active Low
Programmable Active High or Low
To be tied directly to VDD, VDDQ or VSS
Active High
Three State - Deselect via E2 or E3 False
Three State
Active High
To be tied directly to VDD or VDDQ
Active Low
To be tied directly to VSS
Low = Low Impedance [High Drive]
High = High Impedance [Low Drive]
To be tied directly to VDDQ or VSS
Active High
—
—
—
Not connected to die or any other pin
1.8 V Nominal
1.5 or 1.8 V Nominal
—
Operation Control
All address, data and control inputs (with the exception of EP2, EP3, ZQ, and the mode pins, L6, M6, and J6) are synchronized to
rising clock edges. Data in is captured on both rising and falling edges of CK. Read and write operations must be initiated with the
Advance/Load pin (ADV) held low, in order to load the new address. Device activation is accomplished by asserting all three of
the Chip Enable inputs (E1, E2, and E3). Deassertion of any one of the Enable inputs will deactivate the device. It should be noted
that ONLY deactivation of the RAM via E2 and/or E3 deactivates the Echo Clocks, CQ1–CQ2.
Rev: 2.04 5/2005
4/27
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2002, GSI Technology, Inc.
Share Link: 