HA17901AP 查看數據表（PDF） - Renesas Electronics
零件编号
产品描述 (功能)
生产厂家
HA17901AP Datasheet PDF : 16 Pages
| |||
HA17901A Series
Absolute Maximum Ratings
(Ta = 25°C)
Item
Symbol
Ratings
Unit
Power supply voltage
Differential input voltage
Input voltage
Output pin voltage
Output current
Allowable power dissipation
DIP
SOP
TSSOP
VCC
Vin(diff)
Vin
Vout
Iout *1
PT
36
V
±VCC
V
−0.3 to +VCC
V
−0.3 to +36
V
20
mA
625 *2
mW
625 *3
400 *4
Operating temperature
Topr
−40 to +85
°C
Storage temperature
Tstg
−55 to +125
°C
Notes: 1. These products can be destroyed if the output and VCC are shorted together. The maximum output current is
the allowable value for continuous operation.
2. HA17901AP:
These are the allowable values up to Ta = 50°C. Derate by 8.3 mW/°C above that temperature.
3. HA17901AFP/ARP:
When it is mounted on glass epoxy board of 40 mm × 40 mm × 1.6 mmt with 10% wiring density, value at Ta
≤ 25°C. If Ta > 25°C, derated by 6.25 mW/°C.
When it is mounted on glass epoxy board of 40 mm × 40 mm × 1.6 mmt with 30% wiring density. If Ta >
32°C, derated by 6.70 mW/°C.
4. HA17901AT:
These are the allowable values up to Ta = 25°C. Derate by 4 mW/°C above that temperature.
Electrical Characteristics
(VCC = 5 V, Ta = 25°C)
Item
Symbol Min Typ
Max
Unit
Test Conditions
Input offset voltage
VIO
2
7
mV Output switching point:
when VO = 1.4V, RS = 0Ω
Input offset current
IIO
Input bias current
IIB
Common-mode input voltage *1 VCM
5
50
nA
IIN(+) − IIN(−)
25
250
nA
IIN(+) or IIN(−)
0
VCC−1.5
V
Supply current
Voltage Gain *3
Response time *2,3
ICC
0.8
2
mA RL = ∞
AV
(200)
V/mV RL = 15kΩ
tR
(1.3)
µs VRL = 5V, RL = 5.1kΩ
Output sink current
IO(sink)
6
16
mA VIN(−) = 1V, VIN(+) = 0, VO ≤ 1.5V
Output saturation voltage
Output leakage current *3
VO(sat)
ILO
200
400
(0.1)
mV VIN(−) = 1V, VIN(+) = 0, Iosink = 3mA
nA VIN(+) = 1V, VIN(−) = 0, VO = 5V
Notes: 1. Voltages more negative than −0.3 V are not allowed for the common-mode input voltage or for either one of
the input signal voltages.
2. The stipulated response time is the value for a 100 mV input step voltage that has a 5 mV overdrive.
3. Design spec.
Rev.1.00 Mar 10, 2006 page 4 of 15
Share Link: 