HCPL-2503-360 查看數據表（PDF） - Avago Technologies

零件编号

产品描述 (功能)

生产厂家

HCPL-2503-360

Single Channel, High Speed Logic Interface Optocoupler

Avago Technologies 

Ordering Information

HCPL-2503 is UL Recognized with 3750 Vrms and 5000 Vrms (option 020) for 1 minute per UL1577. All devices above

listed are approved under CSA Component Acceptance Notice #5, File CA 88324.

Option

UL 5000

Part

RoHS Non RoHS

Surface Gull

Tape

Vrms/1 IEC/EN/DIN EN

number Compliant Compliant Package Mount Wing & Reel Minute rating 60747-5-2 Quantity

-000E No option

50 per tube

-300E

-300

X

X

50 per tube

-500E

-500

X

X

X

1000 per reel

-020E

-020

X

HCPL-2503 -320E

-320

300mil

DIP-8

X

X

X

-520E

-520

X

X

X

X

50 per tube

50 per tube

1000 per reel

-060E

-060

X

50 per tube

-360E

-360

X

X

X

50 per tube

-560E

-560

X

X

X

X

1000 per reel

To order, choose a part number from the part number column and combine with the desired option from the option

column to form an order entry.

Example 1:

HCPL-2503-000E to order product of 300mil DIP package with RoHS compliant.

Example 2:

HCPL-2503 to order product of 300mil DIP package in tube packaging and non RoHS compliant.

Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and

RoHS compliant option will use ‘-XXXE‘.

Absolute Maximum Ratings

Storage Temperature............................................................................................................................................................–55°C to +125°C

Operating Temperature ......................................................................................................................................................–55°C to +100°C

Lead Solder Temperature (1.6 mm below seating plane) ............................................................................................260°C for 10 s

Average Input Current – IF ................................................................................................................................................................. 25 mA[1]

Peak Input Current – IF (50% duty cycle, 1 ms pulse width) ................................................................................................. 50 mA[2]

Peak Transient Input Current – IF (≤1 µs pulse width, 300 pps)....................................................................................................1.0 A

Reverse Input Voltage – VR (Pin 3-2)........................................................................................................................................................... 5 V

Input Power Dissipation..................................................................................................................................................................... 45 mW[3]

Average Output Current – IO (Pin 6).......................................................................................................................................................8 mA

Peak Output Current – IO ....................................................................................................................................................................... 16 mA

Emitter-Base Reverse Voltage (Pin 5-7)..................................................................................................................................................... 5 V

Supply and Output Voltage – VCC (Pin 8-5), VO (Pin 6-5)................................................................................................... –0.5 V to 7 V

Base Current – IB (Pin 7)..............................................................................................................................................................................5 mA

Output Power Dissipation ..............................................................................................................................................................100 mW[4]

Notes:

1.  Derate linearly above +70˚C free-air temperature at a rate of 0.8 mA/˚C.

2.  Derate linearly above +70˚C free-air temperature at a rate of 1.6 mA/˚C.

3.  Derate linearly above +70˚C free-air temperature at a rate of 0.9 mW/˚C.

4.  Derate linearly above +70˚C free-air temperature at a rate of 2.0 mW/˚C.



Share Link: