IDT72V801 查看數據表（PDF） - Integrated Device Technology
零件编号
产品描述 (功能)
生产厂家
IDT72V801 Datasheet PDF : 16 Pages
| |||
3.3 VOLT DUAL CMOS SyncFIFO™
DUAL 256 X 9, DUAL 512 X 9,
DUAL 1,024 X 9, DUAL 2,048 X 9,
DUAL 4,096 X 9 , DUAL 8,192 X 9
IDT72V801
IDT72V811
IDT72V821
IDT72V831
IDT72V841
IDT72V851
.EATURES:
• The IDT72V801 is equivalent to two IDT72V201 256 x 9 FIFOs
• The IDT72V811 is equivalent to two IDT72V211 512 x 9 FIFOs
• The IDT72V821 is equivalent to two IDT72V221 1,024 x 9 FIFOs
• The IDT72V831 is equivalent to two IDT72V231 2,048 x 9 FIFOs
• The IDT72V841 is equivalent to two IDT72V241 4,096 x 9 FIFOs
• The IDT72V851 is equivalent to two IDT72V251 8,192 x 9 FIFOs
• Offers optimal combination of large capacity, high speed,
design flexibility and small footprint
• Ideal for prioritization, bidirectional, and width expansion
applications
• 10 ns read/write cycle time
• 5V input tolerant
• Separate control lines and data lines for each FIFO
• Separate Empty, Full, programmable Almost-Empty and
Almost-Full flags for each FIFO
• Enable puts output data lines in high-impedance state
• Space-saving 64-pin plastic Thin Quad Flat Pack (TQFP/
STQFP)
• Industrial temperature range (–40°C to +85°C) is available
DESCRIPTION:
The IDT72V801/72V811/72V821/72V831/72V841/72V851/72V851 are
dual synchronous (clocked) FIFOs. The device is functionally equivalent to
two IDT72V201/72V211/72V221/72V231/72V241/72V251 FIFOs in a single
package with all associated control, data, and flag lines assigned to separate
pins.
Each of the two FIFOs (designated FIFO A and FIFO B) contained in the
IDT72V801/72V811/72V821/72V831/72V841/72V851 has a 9-bit input data
port (DA0 - DA8, DB0 - DB8) and a 9-bit output data port (QA0 - QA8,
QB0 - QB8). Each input port is controlled by a free-running clock (WCLKA,
WCLKB), and two Write Enable pins (WENA1, WENA2, WENB1, WENB2).
Data is written into each of the two arrays on every rising clock edge of the Write
Clock (WCLKA, WCLKB) when the appropriate Write Enable pins are
asserted.
The output port of each FIFO bank is controlled by its associated clock pin
(RCLKA, RCLKB) and two Read Enable pins (RENA1, RENA2, RENB1,
RENB2). The Read Clock can be tied to the Write Clock for single clock operation
or the two clocks can run asynchronous of one another for dual clock operation.
An Output Enable pin (OEA, OEB) is provided on the read port of each FIFO
for three-state output control.
Each of the two FIFOs has two fixed flags, Empty (EFA, EFB) and Full (FFA,
FFB). Two programmable flags, Almost-Empty (PAEA, PAEB) and Almost-Full
(PAFA, PAFB), are provided for each FIFO bank to improve memory utilization.
If not programmed, the programmable flags default to Empty+7 for PAEAand
PAEB, and Full-7 for PAFA and PAFB.
The IDT72V801/72V811/72V821/72V831/72V841/72V851 architecture
lends itself to many flexible configurations such as:
• 2-level priority data buffering
• Bidirectionaloperation
• Widthexpansion
• Depth expansion
This FIFO is fabricated using IDT's high-performance submicron CMOS
technology.
.UNCTIONAL BLOCK DIAGRAM
WCLKA
WENA1
WENA2
WRITE CONTROL
LOGIC
WRITE POINTER
RESET LOGIC
DA0 - DA8
INPUT REGISTER
RAM ARRAY
256 x 9, 512 x 9,
1,024 x 9, 2,048 x 9,
4,096 x 9, 8,192 x 9
OUTPUT REGISTER
EFA
WCLKB
PAEA
WENB1
LDA
PAFA
FFA
WENB2
OFFSET REGISTER
FLAG
LOGIC
WRITE CONTROL
LOGIC
READ POINTER
READ CONTROL
LOGIC
WRITE POINTER
RESET LOGIC
DB0 - DB8
INPUT REGISTER
RAM ARRAY
256 x 9, 512 x 9,
1,024 x 9, 2,048 x 9,
4,096 x 9, 8,192 x 9
OUTPUT REGISTER
LDB
OFFSET REGISTER
FLAG
LOGIC
READ POINTER
EFB
PAEB
PAFB
FFB
READ CONTROL
LOGIC
RSA
OEA
RCLKA
QA0 - QA8
RENA1
RENA2
RSB
OEB
QB0 - QB8
The IDT logo is a registered trademark and the SyncFIFO is a trademark of Integrated Device Technology, Inc.
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
1
2001 Integrated Device Technology, Inc.
RCLKB
4093 drw 01
RENB1
RENB2
APRIL 2001
DSC-4093/1
Share Link: 