IRHM7260, JANSR2N7433
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Pre-Irradiation
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 200
∆BVDSS/∆TJ Temperature Coefficient of Breakdown —
Voltage
RDS(on)
Static Drain-to-Source On-State
—
Resistance
—
VGS(th)
Gate Threshold Voltage
2.0
gfs
Forward Transconductance
9.0
IDSS
Zero Gate Voltage Drain Current
—
—
IGSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
—
Gate-to-Source Leakage Reverse
—
Total Gate Charge
—
Gate-to-Source Charge
—
Gate-to-Drain (‘Miller’) Charge
—
Turn-On Delay Time
—
Rise Time
—
Turn-Off Delay Time
—
Fall Time
—
Total Inductance
—
Ciss
Input Capacitance
—
Coss
Output Capacitance
—
Crss
Reverse Transfer Capacitance
—
Typ Max Units
—— V
0.26 — V/°C
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
— 0.070
— 0.077
— 4.0
——
— 25
— 250
— 100
— -100
— 290
— 42
— 120
— 50
— 200
— 200
— 130
6.8 —
5300 —
1200 —
360 —
Ω
VGS = 12V, ID = 25A Ã
VGS = 12V, ID = 35A
V
VDS = VGS, ID = 1.0mA
S
VDS ≥ 15V, IDS = 25A Ã
µA
VDS= 160V ,VGS = 0V
VDS = 160V,
VGS = 0V, TJ = 125°C
nA
VGS = 20V
VGS = -20V
VGS =12V, ID =35A
nC
VDS = 100V
VDD = 100V, ID =35A
ns
VGS =12V, RG = 2.35Ω
nH Measured from Drain lead (6mm /0.25in
from package) to Source lead (6mm /0.25in.
from package) with Source wires internally
bonded from Source Pin to Drain Pad
VGS = 0V, VDS = 25V
pF
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) À
—
—
—
—
35*
140
A
VSD Diode Forward Voltage
— — 1.8 V
trr Reverse Recovery Time
— — 820 ns
QRR Reverse Recovery Charge
— — 8.5 µC
Tj = 25°C, IS = 35A, VGS = 0V Ã
Tj = 25°C, IF = 35A, di/dt ≤ 100A/µs
VDD ≤ 50V Ã
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
*Current limited by package
Thermal Resistance
Parameter
Min Typ Max Units
Test Conditions
RthJC
RthJA
RthCS
Junction-to-Case
Junction-to-Ambient
Case-to-Sink
— — 0.50
— — 48
— 0.21 —
°C/W
Typical socket mount
Note: Corresponding Spice and Saber models are available on the International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com