IS25LQ016 查看數據表（PDF） - Integrated Silicon Solution

零件编号

产品描述 (功能)

生产厂家

IS25LQ016

8Mbit Single Operating Voltage Serial Flash Memory

Integrated Silicon Solution 

16 Mbit Single Operating Voltage Serial Flash Memory With 104

MHz Dual- or 100MHz Quad-Output SPI Bus Interface

IS25LQ016

FEATURES

PRELIMINARY DATASHEET

• Single Power Supply Operation

- Low voltage range: 2.3 V - 3.6 V

• Memory Organization

- IS25LQ016: 2048K x 8 (16 Mbit)

• Cost Effective Sector/Block Architecture

- 16Mb : Uniform 4KByte sectors / Thirty-two

uniform 64KByte blocks

• Serial Peripheral Interface (SPI) Compatible

- Supports single-, dual- or quad-output

- Supports SPI Modes 0 and 3

- Maximum 50 MHz clock rate for normal read

- Maximum 104 MHz clock rate for fast read

- Maximum 208MHz clock rate equivalent Dual SPI

- Maximum 400MHz clock rate equivalent Quad SPI

• Byte Program Operation

- Typical 10 us/Byte

• Page Program (up to 256 Bytes) Operation

- Maximum 0.7ms per page program

• Sector, Block or Chip Erase Operation

- Sector Erase (4KB)150ms (Typ)

- Block Erase (64KB)500ms (Typ)

- Chip Erase 5s (Typ)

• Low Power Consumption

- Max 12 mA active read current

- Max 20 mA program/erase current

- Max 30 uA standby current

• Hardware Write Protection

- Protect and unprotect the device from write

operation by Write Protect (WP#) Pin

• Software Write Protection

- The Block Protect (BP3, BP2, BP1, BP0) bits

allow partial or entire memory to be configured as

read-only

• High Product Endurance

- Guaranteed 100,000 program/erase cycles per

single sector

- Minimum 20 years data retention

• Industrial Standard Pin-out and Package

- 8-pin 208mil SOIC

- 8-contact WSON

- PDIP

- 8-pin 208mil VSOP

- Lead-free (Pb-free) package

•Additional 256-byte Security information one-time

programmable (OTP) area

•Special protect function

- Safe guard function (Appendix 1)

- Sector unlock function (Appendix 2)

GENERAL DESCRIPTION

The IS25LQ016 are 16 Mbit Serial Peripheral Interface (SPI) Flash memories, providing single-, dual or quad-

output. The devices are designed to support a 50 MHz fclock rate in normal read mode, and 104 MHz in fast

read (Quad output is 100MHz), the fastest in the industry. The devices use a single low voltage power supply,

ranging from 2.3 Volt to 3.6 Volt, to perform read, erase and program operations. The devices can be

programmed in standard EPROM programmers.

The IS25LQ016 are accessed through a 4-wire SPI Interface consisting of Serial Data Input/Output (Sl), Serial

Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins. The devices support page program mode,

where 1 to 256 bytes data can be programmed into the memory in one program operation. These devices are

divided into uniform 4 KByte sectors or uniform 64 KByte blocks.

The IS25LQ016 are offered in 8-pin SOIC 208mil, 8-pin PDIP, 8-pin VSOP and 8-contact WSON.

Integrated Silicon Solution, Inc.- www.issi.com

Rev. A

09/20/2012

1

Share Link: