PCF5077T 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

生产厂家

PCF5077T

Power amplifier controller for GSM and PCN systems

Philips Electronics 

Philips Semiconductors

Power amplifier controller for GSM and

PCN systems

Preliminary specification

PCF5077T

SYMBOL

PARAMETER

CONDITIONS

MIN.

TYP. MAX. UNIT

Programmability and accuracy of VHOME (DAC6) at VINT(O)

INL

integral non-linearity

note 7

DNL

differential non-linearity

note 7

Vo(min)

Vo(max)

STS

minimum output voltage

maximum output voltage

step size

DVh1 = 0; DVh0 = 0

DVh1 = 0; DVh0 = 0

−

±1.0 ±3

LSB

−

±0.2 ±1

LSB

50

−

170 mV

1.95

−

2.25 V

−

33

−

mV

Notes

1. Pulses of 7 V are allowed for less than 100 ms.

2. Minimum specified frequency at Tamb = 27 °C. For Tamb = 85 °C a typical value of 4 MHz is specified.

3. Not tested. Guaranteed by design.

4. Slew rates are measured between 10% and 90% of output voltage with a load of approximately 40 pF to ground.

5. Measured with RL = 1.2 kΩ, CL = 80 pF and VDDA2 = 5 V. The voltage drop at the output is less than 20 mV.

6. Referred to VHOME; nominal operating condition, direct control (DC = 1), VHOME programmed to 40.

7. The parameter is measured starting from code 4, due to a saturation effect for the first four codes.

1997 Nov 19

11

Share Link: