MLX10407EDFCA 查看數據表（PDF） - Melexis Microelectronic Systems

零件编号

产品描述 (功能)

生产厂家

MLX10407EDFCA

5-Channel Gauge Driver with Serial Link

Melexis Microelectronic Systems  

Reliability Information

Melexis devices are classified and qualified regarding suitability for infrared, vapor phase and wave

soldering with usual (63/37 SnPb-) solder (melting point at 183degC).

The following test methods are applied:

IPC/JEDEC J-STD-020A (issue April 1999)

Moisture/Reflow Sensitivity Classification For Nonhermetic Solid State Surface Mount Devices

CECC00802 (issue 1994)

Standard Method For The Specification of Surface Mounting Components (SMDs) of Assessed

Quality

MIL 883 Method 2003 / JEDEC-STD-22 Test Method B102

Solderability

For all soldering technologies deviating from above mentioned standard conditions (regarding peak

temperature, temperature gradient, temperature profile etc) additional classification and qualification

tests have to be agreed upon with Melexis.

The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding as-

surance of adhesive strength between device and board.

For more information on manufacturability/solderability see quality page at our website:

http://www.melexis.com/

ESD Precautions

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).

Always observe Electro Static Discharge control procedures whenever handling semiconductor products

3901010407

Rev. 003

Page 10

Aug/02

Share Link: