M366S3253DTS
PC133/PC100 Unbuffered DIMM
DC CHARACTERISTICS
(Recommended operating condition unless otherwise noted, TA = 0 to 70°C)
Parameter
Operating current
(One bank active)
Symbol
Test Condition
Burst length = 1
ICC1 tRC ≥ tRC(min)
IO = 0 mA
Version
Unit Note
-7C -7A -1H -1L
800 720 720 720 mA 1
Precharge standby cur-
rent in power-down mode
ICC2P
ICC2PS
CKE ≤ VIL(max), tCC = 10ns
CKE & CLK ≤ VIL(max), tCC = ∞
16
mA
16
Precharge standby cur-
ICC2N
CKE ≥ VIH(min), CS ≥ VIH(min), tCC = 10ns
Input signals are changed one time during 20ns
160
rent in non power-down
mA
mode
ICC2NS
CKE ≥ VIH(min), CLK ≤ VIL(max), tCC = ∞
Input signals are stable
80
Active standby current in
power-down mode
ICC3P
ICC3PS
CKE ≤ VIL(max), tCC = 10ns
CKE & CLK ≤ VIL(max), tCC = ∞
48
mA
48
Active standby current in
ICC3N
CKE ≥ VIH(min), CS ≥ VIH(min), tCC = 10ns
Input signals are changed one time during 20ns
240
mA
non power-down mode
(One bank active)
ICC3NS CKE ≥ VIH(min), CLK ≤ VIL(max), tCC = ∞
Input signals are stable
200
mA
Operating current
(Burst mode)
Refresh current
Self refresh current
IO = 0 mA
ICC4 Page burst
4banks Activated.
tCCD = 2CLKs
ICC5 tRC ≥ tRC(min)
ICC6 CKE ≤ 0.2V
880 880 800 800 mA 1
1,760 1,600 1,520 1,520 mA 2
C
24
mA
L
12
mA
Notes :
1. Measured with outputs open.
2. Refresh period is 64ms.
3. Unless otherwise noticed, input swing level is CMOS(VIH/VIL=VDDQ/VSSQ).
REV. 0.0 Jan. 2002