KS9286B/KS9286B-L
DIGITAL SIGNAL PROCESSOR for CDP
2) MUTE AND ATTENUATION
By using a mute terminal and the ATTM signal of the CNTL-S register, the audio data is muted or attenuated.
A. Zero Cross Muting
The audio data is muted, after ZCMT of CNTL-S register goes to "H", and in case that mute is "H" and the upper 6
bits of audio data become all "L" or "H".
B. Muting
The audio data is muted when the ZCMT of CNTL-S rgister is "L" and MUTE terminal is "H".
C. Attenuation
The signal attenuation is occured by ATTM of CNTL-S register and MUTE signal as following.
ATTM
0
0
1
1
MUTE
0
1
0
1
Table 10.
Degree of Attenuation
0dB
- dB
-12dB
-12dB
19