LM8560 查看數據表（PDF） - Unisonic Technologies

零件编号

产品描述 (功能)

生产厂家

LM8560

Digital Alarm Clock

Unisonic Technologies 

UTC LM8560

MOS IC

When activated by drop in power supply, all segments which are lit begin to blink and the unit switches

to a power failure detection display. The power failure detection display is canceled by activating VSS to

Hours set or Min set.

*Alarm Operation and Alarm Output :

The alarm signal outputs when alarm content matches the content of current time. When not rest by

either snooze input or alarm off input, output continues after 1 hour and 59 minutes. This output signal

consists of 900Hz 2Hz intermittent (50% duty) modulation signals, When the need arises , a filter can be

applied to after the alarm signal to a DC signal.

*Snooze Input :

When the alarm is sounding and instantly activating VSS to this pin , alarm output is set to OFF for a

period between 8 and 9 minutes after which time the alarm signal is once again output. The snooze

function can be used repeatedly in 1 hours and 59 minutes intervals. A pull-down resistor is built-in

Activating VSS to the snooze pin when the alarm is OFF resets the sleep timer counter to [0:00 ](This is

known as the one-touch sleep timer reset function.)

*Alarm Off Input :

Activating this input pin to VSS instantly sets alarm output to OFF.A pull-down resistor is built-in.

*Sleep Timer and Sleep Output :

Sleep output can turn on the radio and can be set for time intervals of 59 minutes or 1 hour and 59

minute. Refer to Table 2 for the proper selection procedure (59 minutes or 1 hour and 59 minute

selection.) This sleep timer is constructed using a down counter and when the counter content arrives at

[00], output is set to off and the radio turns off. Adding VSS to snooze input turns sleep output off. When

sleep output is on.

UTC UNISONIC TECHNOLOGIES CO., LTD. 5

QW-R502-005,D

Share Link: