LPC2290 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

生产厂家

LPC2290

16/32-bit ARM microcontrollers with CAN, 10-bit ADC and external memory interface

Philips Electronics 

Philips Semiconductors

LPC2290

16/32-bit ARM microcontrollers with external memory interface

6. Functional description

Details of the LPC2290 systems and peripheral functions are described in the

following sections.

6.1 Architectural overview

The ARM7TDMI-S is a general purpose 32-bit microprocessor, which offers high

performance and very low power consumption. The ARM architecture is based on

Reduced Instruction Set Computer (RISC) principles, and the instruction set and

related decode mechanism are much simpler than those of microprogrammed

Complex Instruction Set Computers. This simplicity results in a high instruction

throughput and impressive real-time interrupt response from a small and

cost-effective processor core.

Pipeline techniques are employed so that all parts of the processing and memory

systems can operate continuously. Typically, while one instruction is being executed,

its successor is being decoded, and a third instruction is being fetched from memory.

The ARM7TDMI-S processor also employs a unique architectural strategy known as

THUMB, which makes it ideally suited to high-volume applications with memory

restrictions, or applications where code density is an issue.

The key idea behind THUMB is that of a super-reduced instruction set. Essentially,

the ARM7TDMI-S processor has two instruction sets:

• The standard 32-bit ARM set.

• A 16-bit THUMB set.

The THUMB set’s 16-bit instruction length allows it to approach twice the density of

standard ARM code while retaining most of the ARM’s performance advantage over a

traditional 16-bit processor using 16-bit registers. This is possible because THUMB

code operates on the same 32-bit register set as ARM code.

THUMB code is able to provide up to 65% of the code size of ARM, and 160% of the

performance of an equivalent ARM processor connected to a 16-bit memory system.

6.2 On-Chip static RAM

On-Chip static RAM may be used for code and/or data storage. The SRAM may be

accessed as 8-bits, 16-bits, and 32-bits. The LPC2290 provides 16 kB of static RAM.

6.3 Memory map

The LPC2290 memory maps incorporate several distinct regions, as shown in the

following figures.

In addition, the CPU interrupt vectors may be re-mapped to allow them to reside in

either on-chip boot-loader, external memory BANK0 or on-chip static RAM. This is

described in Section 6.20 “System control”.

9397 750 12874

Preliminary data

Rev. 01 — 09 February 2004

© Koninklijke Philips Electronics N.V. 2004. All rights reserved.

11 of 41

Share Link: