DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

LT1190 查看數據表(PDF) - Linear Technology

零件编号
产品描述 (功能)
生产厂家
LT1190
Linear
Linear Technology Linear
LT1190 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
LT1190
ELECTRICAL CHARACTERISTICS The q denotes the specifications which apply over the full operating
temperature range of 0°C TA 70°C. VS = ±5V, Pin 5 open circuit unless otherwise noted.
SYMBOL PARAMETER
CONDITIONS
LT1190C
MIN TYP MAX
UNITS
VOS
Input Offset Voltage
N8 Package
SO-8 Package
q
3
11
mV
18
mV
VOS /T Input VOS Drift
q
16
µV/°C
IOS
Input Offset Current
IB
Input Bias Current
q
0.2
1.7
µA
q
±0.5 ±2.5
µA
CMRR Common Mode Rejection Ratio
VCM = – 2.5V to 3.5V
q 58
70
dB
PSRR Power Supply Rejection Ratio
VS = ± 2.375V to ± 5V
q 58
70
dB
AVOL
Large-Signal Voltage Gain
RL = 1k, VO = ±3V
RL = 100, VO = ±3V
q
9
20
q
2
6
V/mV
V/mV
VOUT
Output Voltage Swing
IS
Supply Current
Shutdown Supply Current
RL = 1k
Pin 5 at V (Note 8)
q ±3.7 ±3.9
V
q
32
38
mA
q
1.4
2.1
mA
ISHDN
Shutdown Pin Current
Pin 5 at V
q
20
µA
Note 1: Absolute maximum ratings are those values beyond which the life
of the device may be impaired.
Note 2: A heat sink is required to keep the junction temperature below
absolute maximum when the output is shorted.
Note 3: Exceeding the input common mode range may cause the output
to invert.
Note 4: Slew rate is measured between ± 1V on the output, with a ± 3V
input step.
Note 5: Full-power bandwidth is calculated from the slew rate
measurement:
FPBW = SR/2πVP.
Note 6: Settling time measurement techniques are shown in “Take the
Guesswork Out of Settling Time Measurements,” EDN, September 19,
1985. AV = –1, RL = 1k.
Note 7: NTSC (3.58MHz). For RL = 1k, Diff AV = 0.1%, Diff Ph = 0.06°.
Note 8: See Applications section for shutdown at elevated temperatures.
Do not operate the shutdown above TJ > 125°C.
Note 9: AC parameters are 100% tested on the ceramic and plastic DIP
packaged parts (J and N suffix) and are sample tested on every lot of the
SO packaged parts (S suffix).
Optional Offset Nulling Circuit
5V
3+
7
LT1190
2
8
1
6
4
–5V
INPUT OFFSET VOLTAGE CAN BE ADJUSTED OVER A ±150mV
RANGE WITH A 1kTO 10kPOTENTIOMETER
LT1190 • TA03
4

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]