DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

LTC3212EDDB 查看數據表(PDF) - Linear Technology

零件编号
产品描述 (功能)
生产厂家
LTC3212EDDB
Linear
Linear Technology Linear
LTC3212EDDB Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Features
Power and Current Control for Driving RGB LEDs
Individually Programmable Current Sources
1x or 2x Mode, Low Noise, Constant Frequency
Charge Pump
Single Wire Enable Control for All LEDs
White Mode Adjusts R, G, B Currents for White Light
25mA Maximum LED Current
VIN Range: 2.7V to 5.5V
Automatic Soft-Start, Mode Switching and Output
Disconnect in Shutdown Mode
Available in 12-Lead (3mm × 2mm) DFN Package
Applications
Cellular Phones
Media Players
RGB Back Lights
, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
Protected by U.S. Patents, including 6411531.
LTC3212
RGB LED Driver and
Charge Pump
Description
The LTC®3212 is a low noise charge pump RGB LED
driver capable of driving three LEDs up to 25mA each
from a 2.7V to 5.5V input. Low external part count (one
flying capacitor, two bypass capacitors and one to three
programming resistors) makes the LTC3212 ideally suited
for small, battery-powered applications.
Built-in soft-start circuitry prevents excessive inrush cur-
rent during start-up and mode switching. High switching
frequency enables the use of small external capacitors.
The charge pump shuts down to a high impedance mode
to prevent LED leakage while the LTC3212 is off.
Each LED may be individually turned on or off via a single
pin interface. The current through the LEDs may be indi-
vidually programmed with resistors or may share a single
programming resistor. White mode adjusts the red, green
and blue LED current ratios for a white light when all three
LEDs are programmed to be on.
LED currents are regulated using internal low dropout
current sources. Automatic mode switching optimizes
efficiency by monitoring the LED current drivers and
switches mode only when dropout is detected. The part
is available in a 3mm × 2mm 12-lead DFN package.
Typical Application
RGB Power Supply and Current Control
1µF
VIN
2.7V TO 5.5V
1µF
11.8k
CM
CP
VIN
CPO
LTC3212
R
LEDR
LEDEN
ISETB
ISETR
ISETG
LEDG
LEDB
G
B
1µF
INDIVIDUAL WHITE
SETTINGS MODE
LEDR
LEDG
LEDB
15mA
15mA
15mA
13.5mA
15mA
11.2mA
3212 TA01a
3212fb


Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]