M41T94 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

M41T94

Serial Real Time Clock with 44Bytes NVRAM and Reset

STMicroelectronics 

Summary description

1

Summary description

M41T94

Caution:

The M41T94 is a Serial Real Time Clock with 44 bytes of NVRAM and a RESET output. A

built-in 32,768Hz oscillator (external crystal controlled) and 8 bytes of the SRAM (see

Table 4 on page 19) are used for the clock/calendar function and are configured in binary

coded decimal (BCD) format.

An additional 12 bytes of RAM provide status/control of Alarm, Watchdog and Square Wave

functions. Addresses and data are transferred serially via a serial SPI interface. The built-in

address register is incremented automatically after each WRITE or READ data byte. The

M41T94 has a built-in power sense circuit which detects power failures and automatically

switches to the battery supply when a power failure occurs. The energy needed to sustain

the SRAM and clock operations can be supplied by a small lithium button-cell supply when a

power failure occurs. Functions available to the user include a non-volatile, time-of-day

clock/calendar, Alarm interrupts, Watchdog timer and programmable Square Wave output.

Other features include a Power-On reset as well as two additional debounced inputs

(RSTIN1 and RSTIN2) which can also generate an output reset (RST). The eight clock

address locations contain the century, year, month, date, day, hour, minute, second and

tenths/hundredths of a second in 24 hour BCD format. Corrections for 28, 29 (leap year -

valid until year 2100), 30 and 31 day months are made automatically. The ninth clock

address location controls user access to the clock information and also stores the clock

software calibration setting.

The M41T94 is supplied in either a 16-lead plastic SOIC (requiring user supplied crystal and

battery) or a 28-lead SOIC SNAPHAT® package (which integrates both crystal and battery

in a single SNAPHAT top). The 28-pin, 330mil SOIC provides sockets with gold plated

contacts at both ends for direct connection to a separate SNAPHAT housing containing the

battery and crystal. The unique design allows the SNAPHAT battery/crystal package to be

mounted on top of the SOIC package after the completion of the surface mount process.

Insertion of the SNAPHAT housing after reflow prevents potential battery and crystal

damage due to the high temperatures required for device surface-mounting. The SNAPHAT

housing is also keyed to prevent reverse insertion.

The SOIC and battery/crystal packages are shipped separately in plastic anti-static tubes or

in Tape & Reel form. For the 28-lead SOIC, the battery/crystal package (e.g., SNAPHAT)

part number is “M4TXX-BR12SH” (see Table 21 on page 38).

Do not place the SNAPHAT battery/crystal top in conductive foam, as this will drain the

lithium button-cell battery.

6/40

Share Link: