MITSUBISHI MICROCOMPUTERS
4250 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
Skip condition
Detailed description
Continuous
description
–
– Loads the value n in the immediate field to register A.
When the LA instructions are continuously coded and executed, only the first LA instruction is executed
and other LA instructions coded continuously are skipped.
– Transfers bits 7 to 4 to register B and bits 3 to 0 to register A. These bits 7 to 0 are the ROM pattern in
address (DR2 DR1 DR0 A3 A2 A1 A0) specified by registers A and D in page p.
When this instruction is executed, 1 stage of stack register is used.
–
–
Overflow = 0
–
–
(CY) = 0
–
–
–
– Adds the contents of M(DP) to register A. Stores the result in register A. The contents of carry flag CY
remains unchanged.
0/1 Adds the contents of M(DP) and carry flag CY to register A. Stores the result in register A and carry flag
CY.
– Adds the value n in the immediate field to register A.
The contents of carry flag CY remains unchanged.
Skips the next instruction when there is no overflow as the result of operation.
1 Sets (1) to carry flag CY.
0 Clears (0) to carry flag CY.
– Skips the next instruction when the contents of carry flag CY is “0.”
– Stores the one‘s complement for register A‘s contents in register A.
0/1 Rotates 1 bit of the contents of register A including the contents of carry flag CY to the right.
– Execute the logic operation selected by logic operation selection register LO between the contents of
register A and port S, and stores the result in register A.
MITSUBISHI
ELECTRIC
41