M61533FP 查看數據表（PDF） - Hitachi -> Renesas Electronics
零件编号
产品描述 (功能)
生产厂家
M61533FP Datasheet PDF : 13 Pages
| |||
M61533FP
Electrical characteristics
Unless otherwise noted, Ta=25°C, Vcc=9V, f=1kHz, Trim/Master Volume=0dB, Output Gain Control=0dB, SWch
LPF fc=300Hz
Limits
Parameter
Symbol Min. Typ. Max. Unit Test conditions
Power circuit current
IACC
15
30
mA
when no signal is provided
Input/output
Maximum input voltage VIM
2.0* Vrms (1,4,5,6)PIN input,(13,14,15,18)PIN output,
RL=10kΩ, THD=1%
Maximum output voltage VOM1
1.4
1.8
Vrms
6PIN input, 18PIN output, RL=10kΩ,
THD=5% , f=100Hz
VOM2
1.6
2.0
Vrms
(1,4,5)PIN input , (13,14,15)output,
RL=10kΩ, THD=5%
Pass gain
GV
−2
0
+2 dB
(1,4,5,6)PIN input, (13,14,15,18) output,
Vi=0.5Vrms, FLAT
Output noise voltage
Vno1
1.3 4.0 µVrms JIS-A, when no signal is SL/SR/Cch
provided, (1,4,5)PIN
volume =0dB
Rg=0 Ω, (13,14,15)PIN
output
1.3 4.0 µVrms
SL/SR/Cch
volume =-∞dB
Vno2
8.0 16 µVrms JIS-A, when no signal is SWch volume
provided, 6PIN Rg=0 Ω, =0dB
18PIN output,
8.0 16 µVrms
SWch volume =-
∞dB
Distortion
THD1
0.005 0.1 %
(1,4,5)PIN input, (13,14,15)output, BW:400
30kHz, Vo=0.5Vrms, RL=10kΩ
THD2
0.05 0.2 %
6PIN input,12PIN output, 30kHz L.P.F,
f=100Hz, Output Gain Control =0dB,
Vi=0.5Vrms(AGC:off), RL=10kΩ
THD3
5
%
6PIN input, 12PIN output, 30kHz L.P.F,
f=100Hz, Output Gain Control =+12dB,
Vi=0.7Vrms(AGC:on), RL=10kΩ
Maximum attenuation
ATT
−92 −87 dB
Vo=1Vrms, (12,13,14,15) PIN output, JIS-A,
VOL=-∞
Maximum gain
GVM
+10 +12 +14 dB
6PIN input, 12PIN output, f=100Hz,
Vi=0.1Vrms, FLAT, Output Gain Control
=+12dB
Cross talk between
CT
channels
−70 −55 dB
(1,4,5,6)PIN input, (12,13,14,15)PIN output,
Vi=0.5Vrms, JIS-A, RL=47kΩ, Rg=0kΩ
AGC
Attack time
TAGCAT
40
ms
6PIN input, 12PIN output, RL=10kΩ, Output
Gain Control =+12dB
Recovery time
TAGCRE
850
ms
6PIN input, 12PIN output, RL=10kΩ, Output
Gain Control =+12dB
* Note : The signal can not be inputted to more than 2Vrms. Keep this limit.
Rev.1.0, Sep.19.2003, page 8 of 12
Share Link: 