MAPDCC0005
Low Cost Three Way Power Splitter/Combiner
824 – 960 MHz
Rev. V3
Electrical Specifications: TA = 25°C, Z0 = 50
Parameter
Insertion Loss above 4.78 dB
Isolation
VSWR
Amplitude Balance
Phase Balance
Units
Min
dB
—
dB
15
—
—
dB
—
Deg
—
Typ
0.6
18
1.4:1
0.6
2
Max
0.7
—
1.6:1
0.8
4
Absolute Maximum Ratings 2,3
Parameter
Input Power4
Operating Temperature
Storage Temperature
Absolute Maximum
1W CW
-40°C to +85°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. With internal load dissipation of 0.125 W Maximum.
Recommended PCB Configuration
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support