MAX8568A 查看數據表（PDF） - Maxim Integrated

零件编号

产品描述 (功能)

生产厂家

MAX8568A

Complete Backup-Management ICs for Lithium and NiMH Batteries

Maxim Integrated 

Complete Backup-Management ICs

for Lithium and NiMH Batteries

1.12V

BK

CHARGER

IN

50µs

2.43V

INOK

I/O IN

I/O OUT

STEP-UP DC-DC CONVERTER

OD1

MEM IN

MEM OUT

LDO

OD2

Figure 1. Timing Diagram

Applications Information

Setting the Charge Current

Charge current is set by a resistor connected from

CHGI to GND (R5 in Figure 7). The acceptable resistor

range is from 50kΩ to 1800kΩ. RCHGI is calculated by

the following.

( ) ( ) ( ) RCHGI

kΩ

41.2 ×

=

VIN − VBK

+679.4 1.1641





ICHG mA



where VBK is the nominal voltage of the charged back-

up battery. This is the fast-charge current for both

NiMH and lithium batteries. For NiMH batteries, the

trickle charge is 10% of the fast-charge current.

Using a Rechargeable Lithium

Backup Battery

The MAX8568 can charge a lithium-type backup bat-

tery from the main battery connected at IN. Connect

NI/LI to GND for lithium backup battery charging.

STRTV is unused and should be connected to GND in

lithium charge mode.

10 ______________________________________________________________________________________

Share Link: