2.6W Stereo Audio Power Amplifier and
DirectDrive Headphone Amplifier
ELECTRICAL CHARACTERISTICS (continued)
(VDD = PVDD = CPVDD = HPVDD = 5V, GND = PGND = CPGND = 0V, SHDN = VDD, CBIAS = 1µF, C1 = C2 = 1µF, speaker load
terminated between OUT_+ and OUT_-, headphone load terminated between HPOUT_ and GND, GAIN1 = GAIN2 = 0V, TA = TMIN to
TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX
CHARGE PUMP
Charge-Pump Frequency
fOSC
LOGIC INPUT (SHDN, GAIN1, GAIN2)
500
550
600
Logic-Input High Voltage
VIH
Logic-Input Low Voltage
VIL
Logic-Input Current
IIN
2
0.8
±1
LOGIC-INPUT HEADPHONE (HPS)
Logic-Input High Voltage
VIH
2
Logic-Input Low Voltage
VIL
Logic-Input Current
IIN
0.8
10
Note 1: All devices are 100% production tested at room temperature. All temperature limits are guaranteed by design.
Note 2: Guaranteed by design. Not production tested.
Note 3: PSRR is specified with the amplifier input connected to GND through CIN.
Note 4: Output power levels are measured with the thin QFN’s exposed paddle soldered to the ground plane.
UNITS
kHz
V
V
µA
V
V
µA
4 _______________________________________________________________________________________