MAXQ2000-KIT 查看數據表（PDF） - Maxim Integrated
零件编号
产品描述 (功能)
生产厂家
MAXQ2000-KIT Datasheet PDF : 15 Pages
| |||
MAXQ2000 Evaluation Kit
Table 2. Other Jumper and DIP Switch Settings
JUMPER/
SWITCH
JU4
JU5
JU6
SW1 #1
SW1 #2
SW1 #3
SW1 #4
SW1 #5
SW1 #6
SW1 #7
SW1 #8
JU7
JU8
JU9
JU10
JU11
SW3 #1
SW3 #2
SW3 #3
SW3 #4
SW3 #5
SW3 #6
SW3 #7
SW3 #8
SW6 #1
SW6 #2
SW6 #3
SW6 #4
SW6 #5
SW6 #6
SW6 #7
SW6 #8
WHEN OPEN/OFF
WHEN CLOSED/ON
HFXIN is driven by the socketed
crystal
HFXIN is connected to HFXADJ
No effect
P6.0 is connected to DS1077 SCL
No effect
No effect
P6.1 is connected to DS1077 SDA
RS-232 DTR/CTS connected (loopback test)
No effect
No effect
RS-232 RTS/DSR connected (loopback test)
RTS flow control input connected to P5.2
No effect
Serial receive connected to P7.1 (RXD0)
No effect
DTR flow control input connected to P5.3
No effect
DSR flow control output connected to P6.4
No effect
Serial transmit connected to P7.0 (TXD0)
No effect
CTS flow control output connected to P6.5
No effect
DS2433 data line connected to 1-Wire bus
No effect
P6.2 (OWOUT) connected to 1-Wire bus
No effect
P6.3 (OWIN) connected to 1-Wire bus
No effect
HFXADJ is driven by DS1077L output
Kit board is powered from
J1 supply
Kit board will be powered over JTAG
No effect
MAX1407 RESET connected to P6.4
No effect
HFXADJ is driven by MAX1407 FOUT
No effect
MAX1407 CS connected to P5.4 (SSEL)
No effect
MAX1407 SCLK connected to P5.6 (SCLK)
No effect
No effect
MAX1407 DIN connected to P5.5 (MOSI)
MAX1407 DOUT connected to P5.7 (MISO)
No effect
No effect
MAX1407 INT connected to P6.0
MAX1407 DRDY connected to P6.1
No effect
MAX1407 WU1 connected to P6.5
No effect
No effect
SW4 pulls P5.2 to ground when pressed (Note 1)
SW4 pulls P5.3 to ground when pressed (Note 1)
No effect
No effect
SW5 pulls P7.0 to ground when pressed (Note 2)
SW5 pulls P7.1 to ground when pressed (Note 2)
No effect
EEPROM SCL connected to P6.0
No effect
EEPROM SDA connected to P6.1
No effect
LED bar graph displays Port 0 logic levels
Note 1: If both SW6 #2 and #3 are closed, P5.2 and P5.3 will be shorted together.
Note 2: If both SW6 #4 and #5 are closed, P7.0 and P7.1 will be shorted together.
_____________________________________________________________________ 5
Share Link: 