MB90350E 查看數據表（PDF） - Fujitsu

零件编号

产品描述 (功能)

生产厂家

MB90350E

16-bit Microcontrollers

Fujitsu 

MB90350E Series

(Continued)

Part Number

Parameter

MB90F356E

MB90F357E

MB90F356TE

MB90F357TE

MB90F356ES

MB90F357ES

MB90F356TES

MB90F357TES

16-bit input capture

6 channels

Retains 16-bit free-run timer value by (rising edge, falling edge or rising & falling edge), sig-

nals an interrupt.

8/16-bit

programmable pulse

generator

6 channels (16-bit)/10 channels (8-bit)

8-bit reload counters × 12

8-bit reload registers for L pulse width × 12

8-bit reload registers for H pulse width × 12

Supports 8-bit and 16-bit operation modes.

A pair of 8-bit reload counters can be configured as one 16-bit reload counter or as

8-bit prescaler + 8-bit reload counter.

Operation clock frequency : fsys, fsys/21, fsys/22, fsys/23, fsys/24 or 128 µs@fosc = 4 MHz

(fsys = Machine clock frequency, fosc = Oscillation clock frequency)

1 channel

CAN interface

Conforms to CAN Specification Version 2.0 Part A and B.

Automatic re-transmission in case of error

Automatic transmission responding to Remote Frame

Prioritized 16 message buffers for data and ID

Supports multiple messages.

Flexible configuration of acceptance filtering :

Full bit compare/Full bit mask/Two partial bit masks

Supports up to 1 Mbps.

External interrupt

8 channels

Can be used rising edge, falling edge, starting up by H/L level input, external interrupt,

extended intelligent I/O services (EI2OS) and DMA.

D/A converter

⎯

I/O ports

Virtually all external pins can be used as general purpose I/O port.

All push-pull outputs

Bit-wise settable as input/output or peripheral module signal

Settable as CMOS schmitt trigger/ automotive inputs

TTL input level settable for external bus (only for external bus pin)

Flash memory

Supports automatic programming, Embedded Algorithm

Write/Erase/Erase-Suspend/Resume commands

A flag indicating completion of the algorithm

Number of erase cycles : 10000 times

Data retention time : 20 years

Boot block configuration

Erase can be performed on each block.

Block protection with external programming voltage

Flash Security Feature for protecting the content of the Flash (MB90F357x only)

Corresponding EVA

name

MB90V340E-104

MB90V340E-103

* : It is setting of Jumper switch (TOOL VCC) when Emulator (MB2147-01) is used.

Please refer to the Emulator hardware manual about details.

10

DS07-13744-4E

Share Link: