MB91266 查看數據表（PDF） - Fujitsu
零件编号
产品描述 (功能)
生产厂家
MB91266 Datasheet PDF : 54 Pages
| |||
MB91265 Series
Pin no.
Pin
name
Circuit
type
Description
PPG6
Output terminal of PPG timer 6.
This function becomes valid when output of PPG timer 6 is set to enabled.
33
TX0
TX0 output terminal of C-CAN0 (only MB91F267N) .
D This function becomes valid when TX0 output of C-CAN0 is set to enabled.
General purpose input/output port.
P17
This function becomes valid when output of PPG timer 6 and TX0 output* of C-CAN0
are set to disabled.
ADTG1
External trigger input terminal of A/D converter 1.
Since this input is used as required while it selects as A/D activation trigger cause, the
port output must remain off unless intentionally used.
34
IC2
Trigger input terminal of input capture 2.
D
The port can serve as an input when set for input with the setting of the input capture
trigger input. When the port is used for input capture input, this input is used as
required. The port output must therefore remain off unless intentionally used.
General purpose input/output port.
P20
This function becomes valid when the setting of the external trigger input of A/D
converter 1 or the setting of the input capture trigger input is set to disabled.
ADTG2
External trigger input terminal of A/D converter 2.
Since this input is used as required while it selects as A/D activation trigger cause, the
port output must remain off unless intentionally used.
35
IC3
Trigger input terminal of input capture 3.
D
The port can serve as an input when set for input with the setting of the input capture
trigger input. When the port is used for input capture input, this input is used as
required. The port output must therefore remain off unless intentionally used.
General purpose input/output port.
P21
This function becomes valid when the setting of the external trigger input of A/D
converter 2 or the setting of the input capture trigger input is set to disabled.
PWI0
36
P22
Pulse width counter input of PWC timer 0
This function becomes valid when pulse width counter input of PWC timer 0 is set to
enabled.
D
General purpose input/output port.
This function becomes valid when pulse width counter input of PWC timer 0 is set to
disabled.
DTTI
37
P23
Control input signal of multi-function timer waveform generator output RTO0 to RTO5.
This function becomes valid when DTTI input is set to enabled.
D
General purpose input/output port.
This function becomes valid when input of DTTI is set to disabled.
CKI
38
P24
External clock input terminal of free-run timer.
Since this input is used as required while the port is used for external clock input
terminal of free-run timer, the port output must remain off unless intentionally used.
D
General purpose input/output port.
This function becomes valid when external clock input of free-run timer is set to
disabled.
* : C-CAN is set in only MB91F267N.
(Continued)
7
Share Link: 