MB95F108ANWPFM 查看數據表（PDF） - Fujitsu

零件编号

产品描述 (功能)

生产厂家

MB95F108ANWPFM

8-bit Proprietary Microcontrollers

Fujitsu 

MB95100AM Series

Part number

Parameter

MB95

108AM

MB95F

104AMS/

MB95F

106AMS/

MB95F

108AMS

MB95F

104ANS/

MB95F

106ANS/

MB95F

108ANS

MB95F

104AMW/

MB95F

106AMW/

MB95F

108AMW

MB95F

104ANW/

MB95F

106ANW/

MB95F

108ANW

MB95F

104AJS/

MB95F

106AJS/

MB95F

108AJS

MB95F

104AJW/

MB95F

106AJW/

MB95F

108AJW

LIN-UART

Dedicated reload timer allowing a wide range of communication speeds to be set.

Full duplex double buffer

Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capa-

ble

LIN functions available as the LIN master or LIN slave.

8/10-bit A/D converter

(12 channels)

8-bit or 10-bit resolution can be selected.

16-bit reload timer

Two clock modes and two counter operating modes can be selected. Square wave-

form output

Count clock : 7 internal clocks and external clock can be selected.

Counter operating mode : reload mode or one-shot mode can be selected.

8/16-bit compound

timer (2 channels)

Each channel of the timer can be used as “8-bit timer × 2 channels” or “16-bit timer

× 1 channel”.

Built-in timer function, PWC function, PWM function, capture function, and square

waveform output

Count clock : 7 internal clocks and external clock can be selected

16-bit PPG

(2 channels)

PWM mode or one-shot mode can be selected.

Counter operating clock : 8 selectable clock sources

Support for external trigger start

8/16-bit PPG

(2 channels)

Each channel of the PPG can be used as “8-bit PPG × 2 channels” or “16-bit PPG ×

1 channel”.

Counter operating clock : Eight selectable clock sources

Watch counter

(for dual clock product)

Count clock : 4 selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)

Counter value can be set from 0 to 63. (Capable of counting for 1 minute when

selecting clock source 1 second and setting counter value to 60)

Watch prescaler

(for dual clock product)

4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)

External interrupt

(12 channels)

Interrupt by edge detection (rising, falling, or both edges can be selected.)

Can be used to recover from standby modes.

Flash memory

Supports automatic programming, Embedded AlgorithmTM *4

Write/Erase/Erase-Suspend/Resume commands

A flag indicating completion of the algorithm

Number of write/erase cycles (Minimum) : 10000 times

Data retention time : 20 years

Erase can be performed on each block

Block protection with external programming voltage

Flash Security Feature for protecting the content of the Flash

(MB95F108AMS/F108ANS/F108AJS/F108AMW/F108ANW/F108AJW only)

Standby mode

Sleep, stop, watch (for dual clock product) , and timebase timer

(Continued)

5

Share Link: