DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MBM29F400BC 查看數據表(PDF) - Spansion Inc.

零件编号
产品描述 (功能)
生产厂家
MBM29F400BC Datasheet PDF : 48 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MBM29F400TC-55/-70-90/MBM29F400BC-55/-70-90
MBM29F400TC/BC Command Definitions
Command
Sequence
Bus
Write
Cycles
First Bus
Write Cycle
Second
Bus
Write Cycle
Third Bus
Write Cycle
Fourth Bus
Read/Write
Cycle
Fifth Bus
Write Cycle
Sixth Bus
Write Cycle
Req'd
Addr Data Addr Data Addr Data Addr Data Addr Data Addr Data
Word
Read/Reset
1 XXXh F0h — — — — — — — — — —
Byte
Word
555h
2AAh
555h
Read/Reset
3
AAh
55h
F0h RA RD — — — —
Byte
AAAh
555h
AAAh
Word
555h
2AAh
555h
Autoselect
3
AAh
55h
90h — — — — — —
Byte
AAAh
555h
AAAh
Program
Word
555h
2AAh
555h
4
AAh
55h
A0h PA PD — — — —
Byte
AAAh
555h
AAAh
Word
555h
2AAh
555h
555h
2AAh
555h
Chip Erase
6
AAh
55h
80h
AAh
55h
10h
Byte
AAAh
555h
AAAh
AAAh
555h
AAAh
Sector
Erase
Word
555h
2AAh
555h
555h
2AAh
6
AAh
55h
80h
AAh
55h SA 30h
Byte
AAAh
555h
AAAh
AAAh
555h
Sector Erase Suspend Erase can be suspended during sector erase with Addr (“H” or “L”). Data (B0h)
Sector Erase Resume
Erase can be resumed after suspend with Addr (“H” or “L”). Data (30h)
Notes:
Address bits A15 to A11 = X = “H” or “L” for all address commands except or Program Address (PA) and
Sector Address (SA).
Bus operations are defined in “MBM29F400TC/BC User Bus Operation (BYTE = VIH)” and
“MBM29F400TC/BC User Bus Operation (BYTE = VIL)” in sDEVICE BUS OPERATION.
RA = Address of the memory location to be read.
PA = Address of the memory location to be programmed. Addresses are latched on the falling edge of
the WE pulse.
SA = Address of the sector to be erased. The combination of A17, A16, A15, A14, A13, and A12 will
uniquely select any sector.
RD = Data read from location RA during read operation.
PD = Data to be programmed at location PA. Data is latched on the rising edge of WE.
The system should generate the following address patterns:
Word Mode: 555h or 2AAh to addresses A10 to A0
Byte Mode: AAAh or 555h to addresses A10 to A-1
Both Read/Reset commands are functionally equivalent, resetting the device to the read mode.
Command combinations not described in Command Definitions table are illegal.
8

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]