ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics (continued)
Characteristics noted under conditions -40°C ≤ TJ ≤ 85°C unless otherwise noted. Input voltages 2.8 V ≤ VIN ≤ 13.5 V. Typical
values noted reflect the approximate parameter means at TA = 25°C under nominal conditions unless otherwise noted.
Characteristic
Symbol
Min
Typ
Max
Unit
CONTROL AND SUPERVISORY CIRCUITS (EN1, EN2, RESET, CLKSEL, ADDR, RT)
Enable (EN1, EN2) Input Voltage Threshold
Enable (EN1, EN2) Input Voltage Threshold Hysteresis (21)
Enable (EN1, EN2) Pull-Down Resistance
RESET Low-Level Output Voltage, IOL = 5.0 mA
RESET Leakage Current, OFF State, Pulled Up to 5.0 V
RESET Undervoltage Threshold on VOUT (∆VOUT/VOUT) (20)
RESET Overvoltage Threshold on VOUT (∆VOUT/VOUT) (20)
RESET Undervoltage Threshold on VLDO (∆VLDO/VLDO) (20)
RESET Overvoltage Threshold on VLDO (∆VLDO/VLDO) (20)
RT Voltage Threshold
RT current source
RT Saturation Voltage, Reset Timer Current = 300 µA
Maximum Value of the RT Capacitor
CLKSEL Threshold Voltage
CLKSEL Pull-Up Resistance
ADDR Threshold Voltage
ADDR Pull-Up Resistance
I2C Bus (SDA, SCL)
VTHEN
1.2
1.6
2.0
V
VIHYS
–
0.1
–
V
RPU
30
60
90
kΩ
VOL
–
0.1
0.4
V
ILKGRST
–
–
10
µA
VOUTI TH
-12
-7.5
-4.0
%
VOUTI TH
4.0
7.5
12
%
VLDOI TH
-12
-7.5
-4.0
%
VLDOI TH
4.0
7.5
12
%
VTHRT
0.8
1.2
1.5
V
ISRT
17
25
34
mA
VSATRT
–
45
100
mV
CT
–
–
33
µF
VTHCLKS
1.2
1.6
2.0
V
RPUCLKS
60
120
240
kΩ
VTHADDR
1.2
1.6
2.0
V
RPUADDR
60
120
240
kΩ
Input Threshold Voltage
Input Voltage Threshold Hysteresis (21)
SDA, SCL Input Current, Input Voltage = 0.4 V to 5.5 V
SDA Low-Level Output Voltage, 3.0 mA Sink Current
SDA, SCL Capacitance
VITH
VIHYS
II
VOL
CI
1.3
–
1.7
V
–
0.2
–
V
–
–
10
µA
–
–
0.4
V
–
–
10
pF
Notes
20. This parameter does not include the tolerance of the external resistor divider.
21. Not production tested for typical values specified.
34703
10
Analog Integrated Circuit Device Data
Freescale Semiconductor