MC78L12ABPRM 查看數據表（PDF） - ON Semiconductor
零件编号
产品描述 (功能)
生产厂家
MC78L12ABPRM Datasheet PDF : 8 Pages
| |||
MC78L00A Series
APPLICATIONS INFORMATION
Design Considerations
The MC78L00A Series of fixed voltage regulators are
designed with Thermal Overload Protection that shuts
down the circuit when subjected to an excessive power
overload condition. Internal Short Circuit Protection limits
the maximum current the circuit will pass.
In many low current applications, compensation
capacitors are not required. However, it is recommended
that the regulator input be bypassed with a capacitor if the
regulator is connected to the power supply filter with long
wire lengths, or if the output load capacitance is large. The
input bypass capacitor should be selected to provide good
high–frequency characteristics to insure stable operation
under all load conditions. A 0.33 µF or larger tantalum,
mylar, or other capacitor having low internal impedance at
high frequencies should be chosen.The bypass capacitor
should be mounted with the shortest possible leads directly
across the regulators input terminals. Good construction
techniques should be used to minimize ground loops and
lead resistance drops since the regulator has no external
sense lead. Bypassing the output is also recommended.
Figure 7. Current Regulator
Figure 8. ± 15 V Tracking Voltage Regulator
Input
0.33µF
MC78L05A
R
Constant
Current to
IO Grounded Load
The MC78L00 regulators can also be used as a current source
when connected as above. In order to minimize dissipation the
MC78L05C is chosen in this application. Resistor R determines
the current as follows:
IO =
5.0 V
R
+
IB
IIB = 3.8 mA over line and load changes
For example, a 100 mA current source would require R to be a
50 Ω, 1/2 W resistor and the output voltage compliance would be
the input voltage less 7 V.
+20V
0.33µF
0.33µF
20V
MC78L15A
7 –2
6
MC1741
+3
4
6.5
MPS U55
MPS A70
+VO
10k
10k
–VO
Figure 9. Positive and Negative Regulator
+VI
0.33µF
MC78LXXA
+VO
0.1µF
–VI
0.33µF
MC79LXXA
0.1µF
–VO
Device
ORDERING INFORMATION
Operating
Temperature Range
Package
Shipping
MC78LXXACD*
MC78LXXACDR2*
MC78LXXACP
MC78LXXACPRA / MC78LXXACPRE
MC78LXXACPRM / MC78LXXACPRP
MC78LXXABD*
MC78LXXABDR2*
MC78LXXABP*
MC78LXXABPRA / MC78LXXABPRE
MC78LXXABPRM / MC78LXXABPRP
TJ = 0° to +125°C
TJ = –40° to +125°C
SOP–8
SOP–8 / Tape & Reel
TO–92
TO–92 / Tape & Reel
TO–92 / Ammo Pack
SOP–8
SOP–8 / Tape & Reel
TO–92
TO–92 / Tape & Reel
TO–92 / Ammo Pack
98 Units / Rail
2500 Units / Tape & Reel
2000 Units / Bag
2000 Units / Tape & Reel
2000 Units / Ammo Pack
98 Units / Rail
2500 Units / Tape & Reel
2000 Units / Bag
2000 Units / Tape & Reel
2000 Units / Ammo Pack
XX indicates nominal voltage
*Available in 5, 8, 9, 12 and 15 V devices.
http://onsemi.com
7
Share Link: 