MDP1645D04 查看數據表（PDF） - Vishay Semiconductors

零件编号

产品描述 (功能)

生产厂家

MDP1645D04

Thick Film Resistor Networks, Dual-In-Line, Molded DIP

Vishay Semiconductors 

MDP 45, 46

Thick Film Resistor Networks, Dual-In-Line, Molded DIP Vishay Dale

DIMENSIONS in inches [millimeters]

Pin 1

Identification

Pin 1

0.075 ± 0.015

[1.91 ± 0.381]

0.100 ± 0.010

[2.54 ± 0.254]

Non-Accumulative Tol.

7 Spaces

0.850 ± 0.010

[21.59 ± 0.254]

0.120 ± 0.005

[3.05 ± 0.127]

0.018 ± 0.003

[0.457 ± 0.076]

0.700 ± 0.010

[17.78 ± 0.254]

0.030

[0.762] Typ.

0.130 + 0.015

- 0.010

[3.30 + 0.381]

- 0.254]

0.050 ± 0.005

[1.27 ± 0.127]

0.310 ± 0.010

[7.87 ± 0.254]

0.250 ± 0.005

[6.35 ± 0.127]

0.010 + 0.005

- 0.002

[0.254 + 0.127]

- 0.051]

0.290 [7.37] Min.

0.320 [8.13] Nom.

0.360 [9.14] Max.

MDP1645 Package &

MDP1646 Package

2.00

1.00

.125 Single Resistor

- 50

Derating

+ 25

+ 70

+ 125 + 150

Ambient Temperature °C

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

Maximum Operating Voltage

VDC

Voltage Coefficient of Resistance (Typical) Veff

Operating Temperature Range

°C

Storage Temperature Range

°C

MDP Series

100

< 50 ppm/°C

- 55 to + 125

- 55 to + 150

MECHANICAL SPECIFICATIONS

Marking Resistance

to Solvents:

Permanency testing per MIL-

STD-202, Method 215.

Solderability:

Per MIL-STD-202, Method 208E.

Terminals:

Copper alloy, solder plated.

Body:

Molded epoxy.

Weight:

1.5 grams.

PERFORMANCE

TEST

Thermal Shock

Short Time Overload

Low Temperature Operation

Moisture Resistance

Resistance to Soldering Heat

Shock

Vibration

Load Life

Terminal Strength

Insulation Resistance

Dielectric Withstanding Voltage

CONDITIONS

5 cycles between - 65°C and + 125°C

2.5 x rated working voltage 5 seconds

45 minutes at full rated working voltage at - 65°C

240 hours with humidity ranging from 80% RH to 98% RH

Leads immersed in + 260°C solder to within 1/16" of body for 10 seconds

Total of 18 shocks at 100 g's

12 hours at maximum of 20 g's between 10 and 2,000 Hz

1,000 hours at + 70°C, rated power applied 1.5 hours “ON”, 0.5 hour

“OFF” for full 1000 hour period. Derated according to the curve.

4 1/2 pound pull for 30 seconds

10,000 Megohm (minimum)

No evidence of arcing or damage (200 V RMS for 1 minute)

MAX. ∆R (Typical Test Lots)

± 0.50% ∆R

± 0.25% ∆R

± 0.25% ∆R

± 0.50% ∆R

± 0.25% ∆R

± 0.25% ∆R

± 0.25% ∆R

± 0.50% ∆R

± 0.25% ∆R

—

—

Document Number: 31512

Revision 08-Sep-04

For Technical Questions, contact: ff2aresistors@vishay.com

www.vishay.com

49

Share Link: