MLO81100-01700 查看數據表（PDF） - Tyco Electronics

零件编号

产品描述 (功能)

生产厂家

MLO81100-01700

Surface Mount Voltage Controlled Oscillator PCS 1650 - 1750 MHz

Tyco Electronics 

Preliminary Specifications

Surface Mount Voltage Controlled Oscillator

PCS 1650 - 1750 MHz

MLO81100-01700

V1.00

Features

q Miniature Size

q Surface Mount Package

q Electrically Shielded

q Low Phase Noise

q Highly Linear Tuning

Description

LSM1 Package

4.0

0.8

IDENT

VT

12.7

11.8

VCC

M/A-COM

PART NO.

RF

DATE

The MLO81100-01700 is a fundamental single ended

oscillator designed for use in cost sensitive wireless and

telemetry applications. The device has been optimised by

careful selection of the bipolar transistor and varactor diode

for low phase noise and highly linear tuning characteristics.

1.6

1.7

5.5

4

DETAIL A.

0.8

The low profile surface mount package used provides for

electrical shielding, ease of assembly and repeatable

performance. M/A-COM’s surface mount manufacturing

techniques together with automated assembly and electrical

testing ensure a high degree of electrical and mechanical

repeatability at low cost and in high volume. Manufacturing

is carried out in an ISO 9000 qualified facility.

1

3

DETAIL A.

2

8.0

SOLDER RESIST

Electrical Specifications1, TA = +25°C, VCC = +5V (unless otherwise stated)

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Frequency Range

MHz

1650

1750

Tuning Voltage (VT)2

RF Output Power3

1650 - 1750 MHz

V

+0.5

dBm

-2.0

+4.5

+2.0

Supply Voltage (VCC)4

Supply Current (ICC)

Phase Noise5

SSB at 100 KHz offset from carrier

V

mA

dBc/Hz

+4.75

+5.00

-120

+5.25

15

-116

Tuning Sensitivity

1650 - 1750 MHz

MHz/V

40

Tuning Linearity

1650 - 1750 MHz

Ratio

1.5

2.0

Modulation Bandwidth

3 dB bandwidth

MHz

10

Harmonic Outputs6

dBc

-15

Frequency Pushing

VCC 4.75V to 5.25V

MHz/V

3.0

Frequency Pulling

1.5:1 VSWR load, all phases

MHz

5.0

Frequency Drift

MHz/°C

0.15

Tune Input Capacitance

pF

50

1. All specifications apply with a 50 ohm load impedance.

2. Tuning voltages shown are the minimum and maximum voltages required to tune the frequency range including temperature effects -20°C to

+70°C. Devices will oscillate normally with tuning voltages from 0V to +10V.

3. Output power window includes unit to unit variation, temperature effects -20°C to +70°C and frequency flatness (typically ±0.5 dB at any

constant temperature).

4. Devices may be operated at lower supply voltage with reduced performance.

5. For typical phase noise at other offsets see phase noise curve.

6. No non harmonic spurious visible when measured on a test system with a dynamic range of 70 dB.

This Preliminary Data Sheet Contains Typical Electrical Specifications Which May Change Prior To Final Introduction.

M/A-COM Ltd.

1

North America: Tel. (800) 366-2266

Fax (800) 618-8883

s Asia/Pacific: Tel. +81 (03) 3226-1671

Fax +81 (03) 3226-1451

s Europe: Tel. +44 (1344) 869 595

Fax +44 (1344) 300 020

Share Link: